Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FW/4/SECLOG_SESSION_ID_INFO_SYSLOG
Message
FW/4/SECLOG_SESSION_ID_INFO_SYSLOG:<[SerialNumber]> [record time] [HOSTNAME] [version/module/level]: protocol=[proto] srcIp=[ip-address1] dstIp=[ip-address2] srcPort=[Port1] dstPort=[Port2] startTime=[Time1] endTime=[Time2] inTotalPkg=[INTEGER1] inTotalByte=[INTEGER2] outTotalPkg=[INTEGER3] outTotalByte=[INTEGER4] srcVpn=[vpn-instance-name1] dstVpn=[vpn-instance-name2]
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [SerialNumber] | Index of the log. |
| [record time] | Time when the log is recorded, in the format of YYYY-MM-DD HH:MM:SS.
|
| [HOSTNAME] | Device name. |
| [version/module/level] |
|
| [proto] | Protocol type. |
| [ip-address1] | Source IP address of packets. |
| [ip-address2] | Destination IP address of packets. |
| [Port1] | Source interface of packets. |
| [Port2] | Destination interface of packets. |
| [Time1] | Start time of flows. |
| [Time2] | End time of flows. |
| [INTEGER1] | Total number of packets sent into the interzone. |
| [INTEGER2] | Total number of bytes sent into the interzone. |
| [INTEGER3] | Total number of packets flowing out of the interzone. |
| [INTEGER4] | Total number of bytes flowing out of the interzone. |
| [vpn-instance-name1] | Source VPN ID of packets. |
| [vpn-instance-name2] | Destination VPN ID of packets. |
