No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPSec/6/PROFILE_DEL_SPOKE

IPSec/6/PROFILE_DEL_SPOKE

Message

IPSec/6/PROFILE_ADD_SPOKE:IPSec responded to the NHRP deletion notification and deleted the peer with the destination address [IPADDR] from the profile applied to the interface [ULONG]. The return value is [ULONG].

Description

The IPSec module responded to the NHRP deletion notification and dynamically deleted an IKE peer.

Parameters

Parameter Name Parameter Meaning
[IPADDR] Indicates the destination address of the NHRP peer.
[ULONG] Indicates the tunnel interface index.
[ULONG] Indicates the return value.

Possible Causes

After an IPSec profile is bound to the mGRE interface, the IPSec module responds to the event and records it in a log if the device deletes one NHRP peer entry.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 83230

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next