No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE/6/PORTPDOVERLD

POE/6/PORTPDOVERLD

Message

POE/6/PORTPDOVERLD:PD on the interface is over load.(Interface name =[STRING])

Description

A powered device (PD) connected to the interface was in an overvoltage condition.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the name of the interface where the PD was in an overvoltage condition.

Possible Causes

The actual voltage on the interface is higher than the voltage allowed by the interface.

Procedure

  1. Increase the allowed voltage on the interface.

    Run the poe power command in the interface view to increase the allowed voltage on the interface. The default voltage on the interface is 37 W.

  2. Replace the PD.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 85492

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next