No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



TRUNK/5/ADDMEMBERFAIL: The trunk encountered a member interface adding fault. The interface and subsequent interfaces all failed to be added to the trunk interface. (TrunkName=[TrunkName], InterfaceName=[PortName])


An interface (not the first added interface) and its subsequent interfaces failed to be added to an Eth-Trunk interface.


Parameter Name Parameter Meaning
TrunkName Eth-Trunk interface name
InterfaceName Name of the first interface failed to be added to an Eth-Trunk interface

Possible Causes

Configurations existed on the interface that failed to be added to an Eth-Trunk interface.


  • Clear the configurations from the interface failed to be added to the Eth-Trunk interface and re-add it to the Eth-Trunk interface.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 128268

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next