No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HWCM/4/CCOPY

HWCM/4/CCOPY

Message

HWCM/4/CCOPY:Configuration copy. (OperationType=[integer], OptTime=[TIMETICK], OptState=[integer], OptEndTime=[TIMETICK])

Description

The copy operation was recorded.

Parameters

Parameter Name Parameter Meaning
OperationType Type of the operation
OptTime Time of the operation
OptState

Status of the operation:

  • 1: Data is being copied.
  • 2: Successful operation.
  • 3: Invalid operation.
  • 4: Invalid protocol.
  • 5: Invalid source file name.
  • 6: Invalid destination file name.
  • 7: Invalid server IP address.
  • 8: The system is busy.
  • 10: The system encounters a read/write error.
  • 12: System space is insufficient.
  • 13: The file name is unavailable.
  • 14: A file transfer error occurs.
  • 16: Memory is insufficient.
  • 17: The user name or password is incorrect.
  • 18: File transfer times out.
  • 19: An unknown error occurs.
  • 20. The transfer operation is interrupted.
  • 21: The source address is unavailable.
  • 22: The source interface is unavailable.
  • 23: A command execution error occurs.
OptEndTime End time of the operation

Possible Causes

The user can save the configuration file through MIB.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 68391

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next