Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE/6/PDDISCONNECT
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [STRING] | Indicates the name of the interface where a PD is disconnected. |
Possible Causes
1.
A PD was disconnected from the interface.
2.
The network cable was loose or faulty.
3.
A PD was faulty.
Procedure
- The processing methods are as follows:
- If a PD was disconnected from the interface, this log message is informational only and no action is required.
- If the network cable is loose or faulty, properly connect or replace the network cable.
- Replace the PD.
If the log is not generated for the preceding reasons, contact Huawei technical support engineers.