No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V/3/LDP_MSG_ERR

L2V/3/LDP_MSG_ERR

Message

L2V/3/LDP_MSG_ERR:Received an error or unknown signal message. (MessageType=[STRING], PeerIpAddress=[STRING], ErrorReason=[STRING])

Description

Received an error or unknown signal message.

Parameters

Parameter Name Parameter Meaning
MessageType Indicates the type of message.
PeerIpAddress Indicates the remote ip address.
ErrorReason Indicates the reason of the error.

Possible Causes

The received L2VPN LDP signaling packets had an error or unknown field. The remote device might be a non-Huawei device.

Procedure

  1. Check whether the signaling packet sent from the remote device complies with the RFC.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 98228

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next