No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LOAD/5/LOAD_WRONGCMD:Slot [ULONG] autoload command was wrong.


The LPU sends an incorrect command for automatic loading.


Parameter Name Parameter Meaning
[ULONG] Slot ID of an LPU.

Possible Causes

The LPU sends request commands in incorrect order.


  1. Check whether the LPU version is correct.

    If the LPU version is correct, no further action is required.

    If the LPU version is incorrect, remove the LPU and insert it again.

  2. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 83558

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next