Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENVMON/4/POWER_NOT_ENOUGH
Message
ENVMON/4/POWER_NOT_ENOUGH:Failed to power the board in slot [ULONG1] because the remaining power is insufficient. The requested-power is [ULONG2]W, while the available rated power is [ULONG3]W and the available overcurrent protection power is [ULONG4]W.
Description
The remaining power of the device was insufficient, which caused the board unable to be powered on.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [INTER1] | Indicates the slot ID of a board. |
| [INTER2] | Indicates the rated power consumption of a board. |
| [INTER3] | Indicates the available rated power of the system. |
| [INTER4] | Indicates the available overcurrent protection power of the system. |