No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EFM/2/NONTHRESHOLD

EFM/2/NONTHRESHOLD

Message

EFM/2/NONTHRESHOLD:Non-threshold-crossing event occurred. (InterfaceName=[STRING], EventLogIndex=[GAUGE], EventLogTimestamp=[TIMETICK], EventLogOui=[OPAQUE], EventLogType=[GAUGE], EventLogLocation=[INTEGER], EventLogRunningTotal=[COUNTER64])

Description

The non-threshold-crossing event occurred on the EOAM 3AH module.

Parameters

Parameter Name Parameter Meaning
InterfaceName Indicates the name of an interface.
EventLogIndex Indicates the index of an event.
EventLogTimestamp Indicates the time when the event occurs.
EventLogOui Indicates the unique identifier of a manufacturer.
EventLogType Indicates the log type.
  • 254 indicates the timeout.
  • 256 indicates that the local interface is shut down.
  • 257 indicates the DyingGasp event.
  • 258 indicates the CriticalLink event.
EventLogLocation Indicates the location (1 indicates local end, 2 indicates peer end) of the event.
EventLogRunningTotal Indicates the total of non-threshold-crossing events after the OAM is reset.

Possible Causes

The non-threshold-crossing event was detected.

Procedure

  1. An abnormality occurs on the local end or the peer end.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 82794

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next