No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LDP/4/JIONRETRYFAIL:The interface [interface-name] cannot join the multicast group after retrying [times] times.


The number of times that the interface failed to add to the multicast group.


Parameter Name Parameter Meaning
[interface-name] Indicates the interface name.
[times] Indicates the maximum retry times, 60 times.

Possible Causes

LDP instance failed to add to the multicast group because of timeout.


  1. Check whether the configuration of the interface that applies for adding to the multicast group is correct.
  2. Check whether the number of instances that apply for adding to the multicast group is too large.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 126123

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next