No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/4/RST_NBR_IN_PTIAL_GR

OSPF/4/RST_NBR_IN_PTIAL_GR

Message

OSPF/4/RST_NBR_IN_PTIAL_GR:OSPF [process-id] entered the partial GR mode and exited GR for neighbor [neighbor-information] on [network-type] interface [interface-name].

Description

The OSPF process entered the partial GR mode and exited GR.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the ID of an OSPF process.
[neighbor-information] Indicates the IP address of a neighbor.
[network-type] Indicates the type of a network.
[Interface-name] Indicates the name of an interface.

Possible Causes

The OSPF process entered the partial GR mode and exited GR.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 92298

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next