No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFPDT/4/BIND_AUTO

IFPDT/4/BIND_AUTO

Message

IFPDT/4/BIND_AUTO:Can't auto bind, ports in the CO mode exist, please modify the mode as CPE and reactive the main port.

Description

The system displays a message indicating that the G.SHDSL interface cannot be bound in CO mode.

Possible Causes

The G.SHDSL interface is to be bound in CO mode.

Procedure

  1. Check whether the configuration sequence is correct.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 83222

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next