No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP/6/PSB_CLEAN_TIMEOUT

RSVP/6/PSB_CLEAN_TIMEOUT

Message

RSVP/6/PSB_CLEAN_TIMEOUT:The cleanup timer of PSB expired. (IngressLsrId=[IPADDR], TunnelId=[USHORT], EgressLsrId=[IPADDR], LspId=[USHORT], LastRecRefreshTime [ULONG]:[ULONG]:[ULONG](Hour:Minute:Second), CleanupTime=[ULONG](Second))

Description

The timer of PSB expired.

Parameters

Parameter Name Parameter Meaning
IngressLsrId Indicates the LSR ID of the ingress.
TunnelId Indicates the ID of a tunnel.
EgressLsrId Indicates the LSR ID of the egress in the Path message.
LspId Indicates the local LSP ID.
LastRecRefreshTime Indicates the last time when receiving a Resv Refresh message.
CleanupTime Indicates the timeout period of the PSB cleanup timer

Possible Causes

The PSB failed to be updated, causing the clean timer to expire. Between two directly-connected devices, if one directly-connected interface of a device fails, the device cannot send a Path Refresh message. As failing to receiving the Path Refresh message, the other device deletes the TE tunnel after the PSB cleanup timer expires.

Procedure

  1. Check whether there is an operation that shuts down the interface or interrupts services.
  2. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 85995

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next