No relevant resource is found in the selected language.
MENU
Support Documentation
AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007 Log Reference

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FW-LOG/5/STREAM_SYSUP

FW-LOG/5/STREAM_SYSUP

Message

FW-LOG/5/STREAM_SYSUP:system number of [proto] session is too much: [session-count]

Description

The number of connections initiated globally exceeded the maximum value.

Parameters

Parameter Name Parameter Meaning
[proto] Indicates the protocol type of connections. The value can be TCP, UDP, and ICMP.
[session-count] Indicates the number of connections established by a protocol.

Possible Causes

If the traffic monitoring log was enabled, the firewall recorded the log when the number of connections initiated globally exceeded the maximum value.

Procedure

  1. Check logs to find that the number of connections initiated globally exceeded the maximum value. You can change the number if necessary.
Translation
简体中文
Download
Updated: 2020-12-16

Document ID: EDOC1000097209

Views: 293245

Downloads: 238

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :