No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP/6/IF_LIMIT

IGMP/6/IF_LIMIT

Message

IGMP/6/IF_LIMIT:In VPN instance "[vpn-instance-name]", the number of existed IGMP group memberships exceeded the limit on this interface. (FlCode=[STRING][ULONG])

Description

The number of IGMP entries on the current interface exceeded the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current interface was configured with the IGMP limit, the number of IGMP entries on the interface exceeded the limit.

Procedure

  1. Run the igmp limit command in an interface view to adjust the maximum number of IGMP group memberships.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 82652

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next