No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SEP/4/LSA_NUM_REACH_MAX:The number of LSAs in the SEP segment reached the upper limit.(segment ID=[ULONG], LSA number=[ULONG])


The number of Link State Advertisements (LSAs) on the SEP segment reached the upper limit.


Parameter Name Parameter Meaning
segment ID ID of the SEP segment
LSA number Number of LSAs

Possible Causes

The number of nodes on the SEP segment reached the upper limit defined in the PAF file.


  1. Collect configurations and log messages, and then contact technical support personnel to replace the PAF file.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 134288

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next