No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwEssManagementTable(for AC)

hwEssManagementTable(for AC)

hwEssManagementTable describes ESS management. It configures the ESS SSID type, the traffic profile, the security profile, the maximum number of users, the IGMP mode. The entries in this table can be created, deleted, queried and modified.

The index of this table is hwWlanServiceEssName.

OID

Object Name

Syntax

Description

Access

Status

1.3.6.1.4.1.2011.6.139.4.1.1.1

hwWlanServiceEssName

OCTET STRING

This object indicates the name of an ESS. The value is a string of 1 to 31 characters.

Not-accessible

Current

1.3.6.1.4.1.2011.6.139.4.1.1.2

hwWlanServiceEssSsid

OCTET STRING

This object indicates the name of an SSID. The value is a string of 1 to 32 characters.

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.3

hwWlanServiceEssHideSsid

INTEGER

This object indicates whether the SSID is contained in the Beacon frames:

enable(1): indicates that an AP periodically sends Beacon frames that contain empty SSID character strings and does not reply to the broadcast probe requests sent from STAs.

disable(2): indicates that an AP periodically sends Beacon frames that contain valid SSID character strings and reply to the broadcast probe requests sent from STAs.

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.4

hwWlanServiceEssUserIsolate

INTEGER

This object indicates whether users of the same virtual access point are isolated on the layer 2:

enable(1): indicates that users are isolated.

disable(2): indicates that users are not isolated.

The default value is disable(2).

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.5

hwWlanServiceEssType

INTEGER

This object indicates the ESS type.

service(1): sets the type to the service.

ap-management(2): sets the type to the access point management.

ac-management(3): sets the type to the access control management.

The default is service(1).

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.6

hwWlanServiceEssTrafficProfileName

OCTET STRING

This object indicates the name of the traffic profile bound to an ESS. The traffic profile must be configured before you create an ESS. The value is a string of 1 to 31 characters.

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.7

hwWlanServiceEssSecurityProfileName

OCTET STRING

This object indicates the name of a security profile bound to an ESS. The security profile must be configured before you create an ESS. The value is a string of 1 to 31 characters.

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.8

hwWlanServiceEssMaxUserNumber

Integer32

This object indicates the maximum number of users. The value ranges from 1 to 128. The default value is 32.

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.9

hwWlanServiceEssAssociationTimeOut

Integer32

This object indicates the association timeout period. The value ranges from 1 to 30, in minutes. The default value is 5 minutes.

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.10

hwWlanServiceEssIgmpMode

INTEGER

This object indicates the IGMP mode.

proxy(1): indicates the proxy mode(not supported).

snooping(2): indicates the listening mode.

off(3): indicates that IGMP is disabled.

The default value is off(3).

Read-create

Current

1.3.6.1.4.1.2011.6.139.4.1.1.11

hwWlanServiceEssRowStatus

RowStatus

This object indicates the row status. It is used to deliver operation commands: createAndGo(4): create

and destroy(6): delete.

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.12

hwWlanServiceEssForwardMode

INTEGER

This object indicates the CAPWAP forwarding mode:

direct-forward(1): indicates the direct forwarding.

tunnel(2): indicates the forwarding through the tunnel.

Read-only

Current

1.3.6.1.4.1.2011.6.139.4.1.1.13

hwWlanServiceEssNum

Integer32

This object indicates the number of interface bound to an ESS.

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.14

hwWlanServiceVlan

Integer32

This object indicates a service VLAN that is bound to an ESS and delivered to an AP as an uplink VLAN.

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.15

hwWlanServiceEssDhcpSnooping

INTEGER

This object indicates whether DHCP detection is enabled:

1: enabled

2: disabled

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.17

hwWlanServiceEssIPSGEnable

INTEGER

  • This object indicates whether IPSG is enabled.
  • 1: disable
  • 2: enable

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.18

hwWlanServiceEssDhcpTrustPort

INTEGER

  • This object indicates whether DHCP trusted port is enabled.
  • 1: disable
  • 2: enable

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.19

hwWlanServiceEssDaiSwitch

INTEGER

  • This object indicates whether dynamic ARP inspection (DAI) is enabled.
  • 1: disable
  • 2: enable

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.22

hwWlanServiceEssStatus

Integer32

This object indicates the SSID status of an AP managed by the AC.

Read-only

Current

1.3.6.1.4.1.2011.6.139.4.1.1.23

hwWlanServiceEssOfflineManagement

INTEGER

This object configures the management VAP for offline APs:
  • 1: disable (1)
  • 2: enable (2)

Read-write

Current

1.3.6.1.4.1.2011.6.139.4.1.1.33

hwWlanServiceEssBroadCastSwitch

INTEGER

The value of this object indicates whether to enable broadcast storm suppression.
  • disabled(1): disable broadcast storm suppression.
  • enabled(2): enable broadcast storm suppression.

Read-only

current

1.3.6.1.4.1.2011.6.139.4.1.1.34

hwWlanServiceEssMultiCastSwitch

INTEGER

The value of this object indicates whether to enable multicast storm suppression.
  • disabled(1): disable multicast storm suppression.
  • enabled(2): enable multicast storm suppression.

Read-only

current

1.3.6.1.4.1.2011.6.139.4.1.1.35

hwWlanServiceEssUniCastSwitch

INTEGER

The value of this object indicates whether to enable unknown unicast storm suppression.
  • disabled(1): disable unknown unicast storm suppression.
  • enabled(2): enable unknown unicast storm suppression.

Read-only

current

1.3.6.1.4.1.2011.6.139.4.1.1.56

hwWlanServiceEssLearnClientIpEnable

INTEGER

This object indicates whether to enable STA address learning.

read-write

current

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be changed.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 97684

Downloads: 648

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next