No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rip2IfStatTable

rip2IfStatTable

If one interface is enabled with RIP, this table has value. After the statistic information of interface is changed, the value of this table changes.

The index of this table is rip2IfStatAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.23.2.1.1

rip2IfStatAddress

IpAddress

Read-only

The IP Address of this system on the indicated subnet. For unnumbered interfaces, the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.2.1.2

rip2IfStatRcvBadPackets

Counter32

Read-only

The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (for example, a version 0 packet, or an unknown command type).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.2.1.3

rip2IfStatRcvBadRoutes

Counter32

Read-only

The number of routes, in valid RIP packets, which were ignored for any reason (for example, unknown address family, or invalid metric).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.2.1.4

rip2IfStatSentUpdates

Counter32

Read-only

The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.23.2.1.5

rip2IfStatStatus

RowStatus

Read-create

This object indicates whether this interface supports the receiving and sending of packets.

Currently, the maximum access is read-only. The return value of the Get operation can be only 1 and the Set operation is not supported.

Creation Restriction

This table cannot be created.

Modification Restriction

This table cannot be created.

Deletion Restriction

This table cannot be deleted.

Access Restriction

Before reading this MIB table, run the rip mib-binding process-id command to bind the RIP process to SNMP.

Objects in this table have values only when the interface is enabled with RIP.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 120997

Downloads: 681

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next