No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwOspfv3IfTable

hwOspfv3IfTable

The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.147.1.6.1.1

hwOspfv3IfIndex

Integer32

Not-accessible

The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.2

hwOspfv3IfInstId

Integer32

Not-accessible

Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.3

hwOspfv3IfAreaId

HWOspfv3AreaIdTc

Read-create

A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.4

hwOspfv3IfType

INTEGER { broadcast(1), nbma(2), pointToPoint(3), Loopback(4), pointToMultipoint(5), p2mpNonbrodcast(6) }

Read-create

The OSPFv3 interface type.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.5

hwOspfv3IfAdminStatus

Status

Read-create

The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3. DEFVAL { enabled }.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.6

hwOspfv3IfRtrPriority

DesignatedRouterPriority

Read-create

The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. DEFVAL { 1 }.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.7

hwOspfv3IfTransitDelay

HWOspfv3UpToRefreshIntervalTc

Read-create

The estimated number of seconds it takes to transmit a link state update packet over this interface. DEFVAL { 1 }.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.8

hwOspfv3IfRetransInterval

HWOspfv3UpToRefreshIntervalTc

Read-create

The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. DEFVAL { 5 }.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.9

hwOspfv3IfHelloInterval

HWHelloRange

Read-create

The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. DEFVAL { 10 }.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.10

hwOspfv3IfRtrDeadInterval

HWOspfv3DeadIntRangeTc

Read-create

The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. DEFVAL { 40 }.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.11

hwOspfv3IfState

INTEGER { down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7) }

Read-only

The OSPFv3 Interface State.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.12

hwOspfv3IfDesignatedRouter

HWOspfv3RouterIdTc

Read-only

The Router ID of the Designated Router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.13

hwOspfv3IfBackupDesignatedRouter

HWOspfv3RouterIdTc

Read-only

The Router ID of the Backup Designated Router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.14

hwOspfv3IfEvents

Counter32

Read-only

The number of times this OSPFv3 interface has changed its state or an error has occurred.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.15

hwOspfv3IfRowStatus

RowStatus

Read-create

This object permits management of the table by facilitating actions such as row creation, construction and destruction.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.16

hwOspfv3IfMetricValue

Metric

Read-create

The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the hwOspfv3ReferenceBandwidth object.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.17

hwOspfv3IfLinkScopeLsaCount

Gauge32

Read-only

The total number of Link-Scope link state advertisements in this link's link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.18

hwOspfv3IfLinkLsaCksumSum

Unsigned32

Read-only

The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.147.1.6.1.19

hwOspfv3IfPollInterval

Unsigned32

Read-create

The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.

Currently, the maximum access is Read-only.

1.3.6.1.4.1.2011.5.25.147.1.6.1.20

hwOspfv3IfMulticastForwarding

INTEGER { blocked(1), multicast(2), unicast(3) }

Read-create

The way in multicasts are forwarded on this interface, including:
  • Not forwarded
  • Forwarded as data link multicasts
  • Forwarded as data link unicasts
Data link multicasting is not meaningful on point to point and NBMA interfaces, and setting hwOspfv3MulticastForwarding to 0 effectively disables all multicast forwarding.

Currently, the maximum access is Read-only.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 100239

Downloads: 654

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next