No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwOspfv2AreaTable

hwOspfv2AreaTable

This table is used to set some parameters for areas.

The indexes of this table are hwOspfv2ProcessIdIndex and hwOspfv2AreaIdIndex. hwOspfv2ProcessIdIndex is inherited from hwOspfv2ProcessTable.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.155.4.1.1

hwOspfv2AreaIdIndex

IpAddress

Not-accessible

This object is in the format of an IP address, which uniquely identifies an area ID. For example, 0.0.0.0 indicates the backbone area.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.2

hwOspfv2AreaType

INTEGER{nssa(1), stub(2), normal(3)}

Read-create

The value of this object identifies area types, including:
  • Not-So-Stubby Areas (NSSAs)
  • Stub areas
  • Common areas
The default value is normal(3).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.3

hwOspfv2AreaNoSummary

TruthValue{true(1),false(2)}

Read-create

This object indicates that an ABR is disabled from injecting summary LSAs into stub areas or NSSAs. This object can be configured only when the area type is stub or NSSA. If this object is set to true(1), an ABR is disabled from injecting summary LSAs into stub areas or NSSAs. The default value is false(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.4

hwOspfv2AreaNssaFlushTimer

Integer32(0..40)

Read-create

The value of this object is an integer. This object is used to configure an NSSA Flush timer. When the areas on a router are configured as NSSAs or stub areas, the locally generated Type5 LSAs need to be flushed; when hwOspfv2AreaType is changed from an NSSA to a common area, the locally generated Type-7 LSAs are aged. After the aging process is complete, restart the areas. If a large number of LSAs need to be flushed, you can forcibly quit the aging process by starting a waiting timer to continue the subsequent actions of restarting the areas. This object is used to set a value for the Flush timer. The Flush timer is one-off. After all LSAs are flushed, the value recovers to 0.In addition, objects (hwOspfv2AreaNssaDefAdvertise, hwOspfv2AreaNssaTransAlways, hwOspfv2AreaNssaTransTimer, hwOspfv2AreaNssaAllowFaZero, hwOspfv2AreaNssaSuppressFa, and hwOspfv2AreaNssaSetNBit) and hwOspfv2AreaType (when it is set to NSSA) must be configured together. If you need to modify the configurations, the new configurations overwrite the previous configurations. The default value is 0, indicating that no Flush timer is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.5

hwOspfv2AreaNssaDefAdvertise

TruthValue{true(1),false(2)}

Read-create

This object indicates whether a default Type-7 LSA should be generated.A Type-7 LSA default route is generated regardless of whether there is route 0.0.0.0 in the routing table on an ABR. A Type-7 LSA default route is generated only when there is the route 0.0.0.0 in the routing table on an ASBR.The default value is false(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.6

hwOspfv2AreaNssaNoImportRoute

TruthValue{true(1),false(2)}

Read-create

This object is used to decide whether external routes are imported to NSSAs. On an ASBR, if this object is set to true, external routes cannot be advertised to the NSSAs.The default value is false(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.7

hwOspfv2AreaNssaTransAlways

TruthValue{true(1),false(2)}

Read-create

This object indicates whether an NSSA ABR translates Type-7 LSAs into Type5 LSAs unconditionally. If this object is set to true(1), this NSSA ABR translates Type-7 LSAs into Type5 LSAs, ignoring the translator role of other NSSA ABRs.The default value is false(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.8

hwOspfv2AreaNssaTransTimer

Integer32(0..120)

Read-create

The value of this object is an integer, identifying the interval for the transition of the translator role. When an ABR changes from a translator to a non-translator, the ABR still translates Type-7 LSAs into Type5 LSAs within the transition time. The default value is 40.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.9

hwOspfv2AreaNssaAllowFaZero

TruthValue{true(1),false(2)}

Read-create

This object indicates that the forwarding address of the generated Type-7 LSAs is filled in with 0.0.0.0.The default value is false(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.10

hwOspfv2AreaNssaSuppressFa

TruthValue{true(1),false(2)}

Read-create

This object indicates that the forwarding addresses of the Type5 LSAs translated from Type-7 LSAs are suppressed. The default value is false(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.11

hwOspfv2AreaNssaSetNBit

TruthValue{true(1),false(2)}

Read-create

This object indicates that in an NSSA, the option field in the sent DD packet is filled in with N-bit.The default value is false(2), indicating that the option field in the sent DD packet is not filled in with N-bit.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.12

hwOspfv2AreaDefCost

Integer32(-1 | 0..16777214)

Read-create

The value of this object identifies the cost of the default route sent by OSPF to a stub area or an NSSA.The default value is -1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.13

hwOspfv2AreaDescription

OCTETSTRING (SIZE (0..80))

Read-create

This object is a string of characters. It is used to configure description for a specific OSPF area. The default value is a zero-length string, indicating that no description is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.14

hwOspfv2AreaFilterExpAcl

Integer32(0 | 2000..2999)

Read-create

The value of this object identifies that outgoing summary LSAs in the local area are filtered by using ACL numbers. This object saves the numbers of ACLs used for filtering LSAs. If the value of this object is set to 0, it indicates that LSAs are not filtered by using ACL numbers. hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, hwOspfv2AreaFilterExpPrefix, and hwOspfv2AreaFilterExpPolicy are mutually exclusive and cannot be configured at the same time. The default value is 0, indicating that no ACL numbers are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.15

hwOspfv2AreaFilterExpPrefix

OCTETSTRING (SIZE (0..169))

Read-create

This object is a string of characters, indicating that outgoing summary LSAs in the local area are filtered by using IP prefixes.This object saves the IP prefixes used for filtering LSAs. If the length of the IP prefix is set to 0, it indicates that LSAs are not filtered by using IP prefixes. hwOspfv2AreaFilterExpPrefix, hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPolicy are mutually exclusive and cannot be configured at the same time. The default value is a zero-length string, indicating that no IP prefixes are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.16

hwOspfv2AreaFilterExpPolicy

OCTETSTRING (SIZE (0..40))

Read-create

This object indicates that outgoing summary LSAs in the local area are filtered by using routing policies.This object saves the names of the routing policies used for filtering LSAs. If the length of the routing policy name is set to 0, it indicates that LSAs are not filtered by using routing policies. hwOspfv2AreaFilterExpPolicy, hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPrefix are mutually exclusive and cannot be configured at the same time. The default value is a zero-length string, indicating that no routing policies are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.17

hwOspfv2AreaFilterImpAcl

Integer32(0 | 2000..2999)

Read-create

The value of this object identifies that incoming summary LSAs in the local area are filtered by using ACL numbers. This object saves the numbers of the ACLs used for filtering LSAs. If this object is set to 0, it indicates that LSAs are not filtered by using ACL numbers. hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName, hwOspfv2AreaFilterImpPrefix, and hwOspfv2AreaFilterImpPolicy are mutually exclusive and cannot be configured at the same time. The default value is 0, indicating that no ACL numbers are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.18

hwOspfv2AreaFilterImpPrefix

OCTET STRING(SIZE (0..169))

Read-create

This object indicates that incoming summary LSAs in the local area are filtered by using IP prefixes. This object saves the IP prefixes used for filtering LSAs. If the length of the IP prefix is set to 0, it indicates that LSAs are not filtered by using IP prefixes. hwOspfv2AreaFilterImpPrefix, hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName, and hwOspfv2AreaFilterImpPolicy are mutually exclusive and cannot be configured at the same time. The default value is a zero-length string, indicating that no IP prefixes are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.19

hwOspfv2AreaFilterImpPolicy

OCTET STRING(SIZE (0..40))

Read-create

This object indicates that incoming summary LSAs in the local area are filtered by using routing policies.This object saves the names of the routing policies used for filtering LSAs. If the length of the routing policy name is set to 0, it indicates that LSAs are not filtered by using routing policies. hwOspfv2AreaFilterImpPolicy, hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName, and hwOspfv2AreaFilterImpPrefix are mutually exclusive and cannot be configured at the same time. The default value is a zero-length string, indicating that no routing policies are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.20

hwOspfv2AreaAuthModeType

INTEGER{ none(1), simple(2), md5(3), hmd5(4), keychain(5), hmac-sha256(6) }

Read-create

The value of this object is an integer, identifying the authentication mode of areas. The default value is none(1), indicating that no authentication is configured. If this object is set to simple(2), you need to specify the password in plaintext or ciphertext mode. That is, you need to configure hwOspfv2AreaAuthPasswordType and hwOspfv2AreaAuthText at the same time. In addition, hwOspfv2AreaAuthPasswordType cannot be set to none(1).

To configure the simple authentication mode with the authentication key being NULL, set hwOspfv2AreaAuthPasswordType to plainText(2) and set hwOspfv2AreaAuthText to a string of 0 characters.

If this object is set to md5(3) or hmd5(4), you can either specify or need not specify the key ID. When specifying the key ID, you need to configure the password in plaintext or ciphertext mode.

If this object is set to keychain(5), you should specify it and hwOspfv2AreaAuthText together, but should not specify hwOspfv2AreaAuthKeyId and hwOspfv2AreaAuthPasswordType.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.21

hwOspfv2AreaAuthPasswordType

INTEGER{ none(1), plainText(2), cipherText(3) }

Read-create

The value of this object is an integer, identifying the password types of areas, including password in plaintext and ciphertext mode.
  • PlainText indicates the plain text authentication mode. You can enter only the password in plaintext mode. When you view the configuration file, the password is displayed in plain text mode.
  • CipherText indicates the cipher text password. You can enter the password in plaintext or ciphertext mode. When you view the configuration file, the password is displayed in cipher text mode.
If the authentication mode is set to simple(2), you need to specify the password in plaintext or ciphertext mode. That is, you need to configure hwOspfv2AreaAuthPasswordType and hwOspfv2AreaAuthText at the same time. In addition, hwOspfv2AreaAuthPasswordType cannot be set to none(1).If the authentication mode is set to md5(3) or hmd5(4), you can specify the key ID. When specifying the key ID, you need to configure hwOspfv2AreaAuthKeyId, hwOspfv2AreaAuthPasswordType, and hwOspfv2AreaAuthText at the same time. The default value is none(1), indicating that no password types are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.22

hwOspfv2AreaAuthKeyId

Integer32(0..255)

Read-create

The value of this object identifies the authentication identifiers of areas. This object can be configured only when the authentication mode is set to md5(3) or hmd5(4). The value is an integer ranging from 1 to 255. The value 0 indicates that this object is not configured. The default value is 0, indicating that no authentication identifiers are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.23

hwOspfv2AreaAuthText

OCTET STRING(SIZE (0..392))

Read-create

This object indicates the authenticators of areas and must be used together with hwOspfv2AreaAuthPasswordType.In simple mode, you can input a plain text string of 1 to 8 bytes or a cipher text string of 24 bytes; in md5 mode and hmac-md5 mode, you can input a plain text string of 1 to 255 bytes or a cipher text string of 20 to 392 bytes. When read, hwOspfv2AreaAuthPasswordType always returns an octet string of length zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.25

hwOspfv2AreaAreaRowStatus

RowStatus

Read-create

This object indicates a row in hwOspfv2AreaTable, which can be set to CreatAndGo and Destroy only. When this object is set to CreatAndGo and a row is created, the status of this object changes to Active.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.26

hwOspfv2AreaFilterExpAclName

DisplayString (SIZE (0..32))

Read-create

This object is a string of characters, indicating that outgoing summary LSAs in the local area are filtered by using ACL names. This object saves the names of ACLs used for filtering LSAs. If the value of this object is set to 0, it indicates that LSAs are not filtered by using ACL names. hwOspfv2AreaFilterExpPrefix, hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpAclName, and hwOspfv2AreaFilterExpPolicy are mutually exclusive and cannot be configured at the same time. The default value is a zero-length string, indicating that no ACL names are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.27

hwOspfv2AreaFilterImpAclName

DisplayString (SIZE (0..32))

Read-create

This object is a string of characters, indicating that incoming summary LSAs in the local area are filtered by using ACL names. This object saves the names of ACLs used for filtering LSAs. If the value of this object is set to 0, it indicates that LSAs are not filtered by using ACL names. hwOspfv2AreaFilterImpPrefix, hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilterImpAclName, and hwOspfv2AreaFilterImpPolicy are mutually exclusive and cannot be configured at the same time. The default value is a zero-length string, indicating that no ACL names are configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.155.4.1.28

hwOspfv2AreaAuthKeychName

DisplayString

Read-create

This object indicates the keychain name. It is a string of 1 to 47 characters.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in hwOspfv2AreaTable can be created only after the entries in hwOspfv2ProcessTable are created. You must input indexes when creating entries. The objects (hwOspfv2AreaNssaFlushTimer, hwOspfv2AreaNssaDefAdvertise, hwOspfv2AreaNssaNoImportRoute, hwOspfv2AreaNssaTransTimer, hwOspfv2AreaNssaAllowFaZero, hwOspfv2AreaNssaSuppressFa, and hwOspfv2AreaNssaSetNBit) and hwOspfv2AreaType must be configured at the same time. In addition, these objects can be configured only when hwOspfv2AreaType is set to NSSA.hwOspfv2AreaDefCost can be configured only when hwOspfv2AreaType is set to NSSA or stub.hwOspfv2AreaNoSummary and hwOspfv2AreaType must be configured at the same time. In addition, the two objects can be configured only when hwOspfv2AreaType is set to NSSA or stub. If an SNMP packet contains the operation of creating rows and the operation of setting common objects (non-index objects and non-row-status objects are called common objects), rows are created and then common objects are set. The configurations in the same row of a table can be rolled back.

Modification Restriction

You can modify the values of common objects (non-index objects and non-row-status objects are called common objects) only after rows are created. The index cannot be modified after rows are created.

Deletion Restriction

Multiple variable bindings are supported. If an SNMP packet contains the operation of deleting rows and the operation of setting common objects (non-index objects and non-row-status objects are called common objects), rows are deleted before common objects are set.

Access Restriction

The default values of MIB objects and command lines are defined differently and thus they do not necessarily correspond to each other.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 100695

Downloads: 654

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next