No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mplsL3VpnVrfRteTable

mplsL3VpnVrfRteTable

This table specifies per-interface MPLS L3VPN VRF Table routing information.

Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces.

Note that this table contains both BGP and Interior Gateway Protocol IGP routes, as both may appear in the same VRF.

The indexes of this table are mplsL3VpnVrfName, mplsL3VpnVrfRteInetCidrDestType, mplsL3VpnVrfRteInetCidrDest, mplsL3VpnVrfRteInetCidrPfxLen, mplsL3VpnVrfRteInetCidrPolicy, mplsL3VpnVrfRteInetCidrNHopType and mplsL3VpnVrfRteInetCidrNextHop.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.166.11.1.4.1.1.1

mplsL3VpnVrfRteInetCidrDestType

InetAddressType

Not-accessible

The type of the mplsL3VpnVrfRteInetCidrDest address, as defined in the InetAddress MIB.

Only those address types that may appear in an actual routing table are allowed as values of this object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.2

mplsL3VpnVrfRteInetCidrDest

InetAddress

Not-accessible

The destination IP address of this route. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrDestType object.

The values for the index objects mplsL3VpnVrfRteInetCidrDest and mplsL3VpnVrfRteInetCidrPfxLen must be consistent.

When the value of mplsL3VpnVrfRteInetCidrDest is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object mplsL3VpnVrfRteInetCidrPfxLen MUST be equal to x.If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.3

mplsL3VpnVrfRteInetCidrPfxLen

Unsigned32 (0..128)

Not-accessible

Indicates the number of leading one bit that forms the mask to be logical-ANDed with the destination address before being compared to the value in the mplsL3VpnVrfRteInetCidrDest field.

The values for the index objects mplsL3VpnVrfRteInetCidrDest and mplsL3VpnVrfRteInetCidrPfxLen must be consistent.

When the value of mplsL3VpnVrfRteInetCidrDest is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object mplsL3VpnVrfRteInetCidrPfxLen MUST be equal to x.

If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.5

mplsL3VpnVrfRteInetCidrNHopType

InetAddressType

Not-accessible

The type of the mplsL3VpnVrfRteInetCidrNextHop address, as defined in the InetAddress MIB.

Value should be set to unknown(0) for non-remote routes.

Only those address types that may appear in an actual routing table are allowed as values of this object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.6

mplsL3VpnVrfRteInetCidrNextHop

InetAddress

Not-accessible

On remote routes, the address of the next system en route.

For non-remote routes, a zero-length string. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrNHopType object.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.7

mplsL3VpnVrfRteInetCidrIfIndex

InterfaceIndexOrZero

Read-create

The ifIndex value that identifies the local interface through which the next hop of this route should be reached.

A value of 0 is valid and represents the scenario where no interface is specified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.11.1.4.1.1.8

mplsL3VpnVrfRteInetCidrType

INTEGER

Read-create

The type of route:
  • 1: other(1)
  • 3: local(3)
  • 4: remote(4)

Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination.

Routes that do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally.

This is used in some protocols as a means of correctly aggregating routes.

Currently, the maximum access is read-only.

For direct routes, loopback and static routes, local(3), for remote crossed route remote(4) and for all others(1)

1.3.6.1.2.1.10.166.11.1.4.1.1.9

mplsL3VpnVrfRteInetCidrProto

IANAipRouteProtocol

Read-only

The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.10

mplsL3VpnVrfRteInetCidrAge

Gauge32

Read-only

The number of seconds since this route was last updated or otherwise determined to be correct.

Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.11.1.4.1.1.11

mplsL3VpnVrfRteInetCidrNextHopAS

InetAutonomousSystemNumber

Read-create

The Autonomous System Number of the next hop.

The semantics of this object are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value.

When this object is unknown or not relevant, its value should be set to zero.

When mplsL3VpnVrfRteInetCidrProto is set to BGP, this node is the last AS that the BGP AS-Path passes through.

1.3.6.1.2.1.10.166.11.1.4.1.1.12

mplsL3VpnVrfRteInetCidrMetric1

Integer32(-1 or 0..2147483647)

Read-create

The primary routing metric for this route.

The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value.

If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.11.1.4.1.1.13

mplsL3VpnVrfRteInetCidrMetric2

Integer32(-1 or 0..2147483647)

Read-create

An alternate routing metric for this route.

The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value.

If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

The value of this object is the priority of a routing protocol.

1.3.6.1.2.1.10.166.11.1.4.1.1.14

mplsL3VpnVrfRteInetCidrMetric3

Integer32(-1 or 0..2147483647)

Read-create

An alternate routing metric for this route.

The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value.

If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

The value of this object is always 2147483647.

1.3.6.1.2.1.10.166.11.1.4.1.1.15

mplsL3VpnVrfRteInetCidrMetric4

Integer32(-1 or 0..2147483647)

Read-create

An alternate routing metric for this route.

The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value.

If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

The value of this object is always 2147483647.

1.3.6.1.2.1.10.166.11.1.4.1.1.16

mplsL3VpnVrfRteInetCidrMetric5

Integer32(-1 or 0..2147483647)

Read-create

An alternate routing metric for this route.

The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value.

If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

The value of this object is always 2147483647.

1.3.6.1.2.1.10.166.11.1.4.1.1.17

mplsL3VpnVrfRteXCPointer

MplsIndexType

Read-create

Index into mplsXCTable that identifies which cross-connect entry is associated with this VRF route entry by containing the mplsXCIndex of that cross-connect entry.

The string containing the single-octet 0x00 indicates that a label stack is not associated with this route entry.

This can be the case because the label bindings have not yet been established, or because some change in the agent has removed them.

When the label stack associated with this VRF route is created, it MUST establish the associated cross-connect entry in the mplsXCTable and then set that index to the value of this object.

Changes to the cross-connect object in the mplsXCTable MUST automatically be reflected in the value of this object.

If this object represents a static routing entry, then the manager must ensure that this entry is maintained consistently in the corresponding mplsXCTable as well.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.11.1.4.1.1.18

mplsL3VpnVrfRteInetCidrStatus

RowStatus

Read-create

The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).

Currently, the maximum access is read-only.

The value of this object is always active(1).

Create Restriction

Not Allowed.

Modify Restriction

Not Allowed

Delete Restriction

Not Allowed

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 98836

Downloads: 652

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next