No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwApRegionTable(for AC)

hwApRegionTable(for AC)

This table is used to add, delete, modify, and query AP regions.

If the signals of several neighboring APs interfere with each other, the radio channels and power of these APs need to be adjusted. Adjusting the radio channels and power of an AP may lead to adjustment of another AP. To quicken adjustment, minimize the impact, and reduce the workload, all the APs accessing the same AC can be divided into several regions. The impact of adjustment on an AP is limited within the local region. After AP regions are added, you can specify the AP region. The radio channels and power of the APs in the same region will be adjusted uniformly.

The index of this table is hwApRegionIndex.

OID

Object Name

Syntax

Description

Access

Status

1.3.6.1.4.1.2011.6.139.2.5.1.1.1

hwApRegionIndex

Integer32

This object indicates the ID of an AP region.

Not-accessible

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.2

hwApRegionName

Octet string

This object indicates the name of an AP region.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.3

hwApRegionDeployMode

Integer

This object indicates the AP deployment mode in an AP region.
  • Sparse mode: In this mode, all the APs in a region are sparsely located without any signal interference between each other. In this case, an AP is an independent region. However, if one region is created for each AP, the configuration workload is heavy. Therefore, a special region can be created as a solution to contain all these APs. The attributes of these APs require no adjustment, and every AP can work with the greatest radio power.
  • Common mode: In this mode, the APs in a region are relatively sparsely located. To meet basic service requirements, each AP should work with at least 50% of the maximum radio power.
  • Dense mode: In this mode, the APs in a region are densely located. To meet basic service requirements, each AP should work with at least 25% of the maximum radio power.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.4

hwApRegionApNumber

Integer32

This object indicates the number of the APs in an AP region.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.5

hwApRegionApIndexMask

Octet string

This object indicates the index mask of the APs in an AP region. The value is a hexadecimal string with characters in upper case. The value is a hexadecimal data block. Each bit shows whether an AP exists in the region: 1 indicates that the AP resides in the region; 0 indicates that the AP does not reside in the region. Each byte represents eight APs.

For example, the first byte represents APs 0 to 7; the second byte represents APs 8 to 15. For example, if only APs 0, 4, 5, 6, 7, 9 exist, the values of this object are 11110001 and 00000010 in binary notation, and the first byte of this object is 0xF1 and the second byte is 0x2.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.6

hwApRegionRowStatus

RowStatus

This object indicates the row status of this table.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.7

hwApRegionForwardMode

Integer

This object indicates the AP forwarding mode in an AP region.

The value can be 1, 2, or -1:
  • 1: direct forwarding
  • 2: tunnel forwarding

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1.8

hwApRegionCountryCode

OCTET STRING

This object indicates the country code corresponding to the AP region, for example, CN or US.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1

hwApRegionScanChannel2G

OCTET STRING

This object indicates region probe channels on the 2.4 GHz frequency band.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.5.1.1

hwApRegionScanChannel5G

OCTET STRING

This object indicates region probe channels on the 5 GHz frequency band.

Read-only

Current

Creation Restriction

None.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 97679

Downloads: 648

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next