No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwApTable(for AC)

hwApTable(for AC)

This table describes the AP state. You can modify, reset, and query the configurations of APs and restore factory settings of APs.

The index of this table is hwApIndex.

OID

Object Name

Syntax

Description

Access

Status

1.3.6.1.4.1.2011.6.139.2.6.1.1.1

hwApIndex

Integer32

This object indicates the ID of an AP.

Not-accessible

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.2

hwApUsedType

Octet string

This object indicates the type of the AP.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.3

hwApUsedProfileName

Octet string

This object indicates the name of the AP profile.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.4

hwApUsedRegionIndex

Integer32

This object indicates the ID of the AP region.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.5

hwApMac

MacAddress

This object indicates the MAC address of the AP.

read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.6

hwApSn

Octet string

This object indicates the SN of the AP.

read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.7

hwApSysName

Octet string

This object indicates the name of the AP.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.8

hwApRunState

Integer

This object indicates the status of the AP:

  • 1: idle(1)
  • 2: autofind(2)
  • 3: typeNotNatch(3)
  • 4: fault(4)
  • 5: config(5)
  • 6: configFailed(6)
  • 7: download(7)
  • 8: normal(8)
  • 9: committing(9)
  • 10: commitFailed(10)
  • 11:standby(11)

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.9

hwApSoftwareVersion

Octet string

This object indicates the software version of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.10

hwApHardwareVersion

Octet string

This object indicates the hardware version of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.11

hwApCpuType

Octet string

This object indicates the CPU type.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.12

hwApCpufrequency

Integer32

This object indicates the CPU frequency, in MHz.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.13

hwApMemoryType

Octet string

This object indicates the memory type.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.14

hwApDomain

Octet string

This object indicates the AP region.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.15

hwApIpAddress

IpAddress

This object indicates the IP address of the AP.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.16

hwApIpNetMask

IpAddress

This object indicates the IP mask of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.17

hwApGatewayIp

IpAddress

This object indicates the gateway IP address of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.18

hwApMemorySize

Integer32

This object indicates the memory size of the AP, in MB.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.19

hwApFlashSize

Integer32

This object indicates the flash card size of the AP, in MB.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.20

hwApRunTime

Unsigned32

This object indicates the running duration of the AP, in seconds.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.21

hwApUpEthPortSpeed

Integer

This object indicates the transmission rate of the uplink Ethernet interface on the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.22

hwApUpEthPortSpeedMode

Integer

This object indicates the transmission rate mode of the uplink Ethernet interface on the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.23

hwApUpEthPortDuplex

Integer

This object indicates the duplex status of the uplink Ethernet interface on the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.24

hwApUpEthPortDuplexMode

Integer

This object indicates the duplex mode of the uplink Ethernet interface on the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.25

hwApAdminOper

Integer

This object indicates the administrative status of the AP.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.26

hwApRowstatus

RowStatus

This object indicates the row status of this table.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.27

hwApPerformanceStatCycle

Integer

This object indicates the interval for collecting AP performance statistics.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.28

hwApDNS

IpAddress

This object indicates the DNS server address of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.29

hwApRunningMode

Integer

This object indicates the running mode of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.30

hwApForwardMode

Integer

This object indicates the AP forwarding mode.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.31

hwApAntennaMode

Integer

This object indicates the AP antenna mode.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.32

hwApCpuThreshold

Integer32

This object indicates the AP's CPU alarm threshold.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.33

hwApMemThreshold

Integer32

This object indicates the AP's memory alarm threshold.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.34

hwApNEnumber

OCTET STRING

This object indicates the AP's NE ID.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.35

hwApOnlineTime

Unsigned32

This object indicates the AP's online duration, in seconds.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.36

hwApSysSoftwareDesc

OCTET STRING

This object indicates the AP's system software description.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.37

hwApSysHardtwareDesc

OCTET STRING

This object indicates the AP's system hardware description.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.38

hwApSysManufacture

OCTET STRING

This object indicates the manufacturer of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.39

hwApSysSoftwareName

OCTET STRING

This object indicates the AP's software name.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.40

hwApSysSoftwareVendor

OCTET STRING

This object indicates the AP's software manufacturer.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.41

hwApManagementVlanID

Integer32

This object indicates the management VLAN of the AP.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.49

hwApLldpEnable

Integer

This object indicates whether LLDP is enabled.
  • 1: disable
  • 2: enable

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.50

hwApLldpManageAddr

Integer

This object indicates whether LLDP management address is enabled.
  • 1: disable
  • 2: enable

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.51

hwApLldpPortDes

Integer

This object indicates whether LLDP port description is enabled.
  • 1: enable
  • 2: disable

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.52

hwApLldpSysCab

Integer

This object indicates whether LLDP system compatibility is enabled.
  • 1: enable
  • 2: disable

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.53

hwApLldpSysDes

Integer

This object indicates whether LLDP system description is enabled.
  • 1: enable
  • 2: disable

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.54

hwApLldpSysName

Integer

This object indicates whether LLDP system name is enabled.
  • 1: enable
  • 2: disable

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.55

hwApLldpDelay

Integer32

This object indicates delay of LLDP messages.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.56

hwApLldpHoldMultiplier

Integer32

This object indicates the detection time multiplier.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.57

hwApLldpInterval

Integer32

This object indicates the interval for sending LLDP packets.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.58

hwApLldpRestartDelay

Integer32

This object indicates the delay in re-enabling LLDP.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.59

hwApLldpAdminStatus

Integer32

This object indicates whether LLDP packet sending and receiving are enabled.
  • txrx(1): Both packet sending and receiving are enabled.
  • rx(2): Only packet receiving is enabled.
  • tx(3): Only packet sending is enabled.

The default value is txrx (1).

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.60

hwApLldpReportInterval

Integer32

This object indicates the interval at which the AP reports LLDP neighbor information to an AC.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.61

hwApBomCode

OCTET STRING

This object indicates the Bom code of the AP.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.63

hwApProtectAcPriority

Integer32

This object indicates the priority of a backup AC.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.64

hwApProtectAcIP

IpAddress

This object indicates the IP address of a backup AC.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.65

hwApOpticalHighRxPowerThreshold

Integer32

This object indicates the upper alarm threshold of the AP's receive power.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.66

hwApOpticalLowRxPowerThreshold

Integer32

This object indicates the lower alarm threshold of the AP's receive power.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.67

hwApOpticalHighTemperatureThreshold

Integer32

This object indicates the upper temperature threshold of the AP's optical module.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.68

hwApOpticalLowTemperatureThreshold

Integer32

This object indicates the lower temperature threshold of the AP's optical module.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.69

hwApKeepService

Integer

This object indicates the duration of service on the AP.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.70

hwApPriorityAccessMode

Integer32

This object indicates that the 5 GHz frequency band is preferred for wireless access.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.71

hwAplineateportMode

Integer

This object indicates the working mode of the AP's wired-side interface.
  • 1: root
  • 2: endpoint

The default value is root (1).

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.72

hwAplineateportVlanTagged

OCTET STRING(1024)

This object indicates the tagged VLAN configured for the wired-side interface. By default, no tagged VLAN is configured for a wired-side interface.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.73

hwAplineateportVlanUntagged

OCTET STRING(1024)

This object indicates the untagged VLAN configured for the wired-side interface. By default, no untagged VLAN is configured for a wired-side interface.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.74

hwAplineateportPvidVlan

Integer32

This object indicates the PVID of the wired-side interface. The default value is 0.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.75

hwAplineateportUserIsolate

Integer

This object indicates whether user isolation is enabled on the wired-side interface.
  • 1: disable
  • 2: enable

The default value is disable.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.76

hwAplineateportStpEnable

Integer

This object indicates whether STP is enabled on the wired-side interface.
  • 1: disable
  • 2: enabled

The default value is disable.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.77

hwApHighTemperatureThreshold

Integer32

This object indicates the upper temperature threshold of the AP.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.78

hwApLowTemperatureThreshold

Integer32

This object indicates the lower temperature threshold of the AP.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.79

hwApReset

Integer32

This object resets the AP with a specified AP ID.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.83

hwApAttackFloodInterval

Integer32

The value of this object identifies the interval for detecting flood attacks.

The value ranges from 10 to 120, in seconds.

The default value is 60.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.84

hwApAttackFloodTimes

Integer32

The value of this object identifies the threshold for flood attack packets.

The value ranges from 1 to 100.

The default value is 30.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.85

hwApDynamicBlacklistEnable

Integer32

The value of this object indicates whether to enable dynamic blacklist.

  • 1: disable(1)

  • 2: enable(2)

By default, dynamic blacklist is disabled.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.86

hwApDynamicBlacklistAgingInt

Integer32

The value of this object identifies the aging time for the dynamic blacklist.

The value ranges from 180 to 3600, in seconds.

The default value is 600.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.87

hwApAttackPskInterval

Integer32

The value of this object identifies the interval for detecting PSK attacks.

The value ranges from 10 to 120, in seconds.

The default value is 60.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.88

hwApAttackPskTimes

Integer32

The value of this object identifies the threshold for PSK attack packets.

The value ranges from 1 to 100.

The default value is 20.

Read-create

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.89

hwApAccessBalanceGap

Integer32

The value of this object identifies the load difference threshold.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.91

hwApIpv6NetMask

OCTET STRING

This object indicates the AP's IPv6 address mask.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.92

hwApGatewayIpv6

OCTET STRING

This object indicates the AP's IPv6 gateway.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.93

hwApIpv6DNS

OCTET STRING

This object indicates the AP's IPv6 DNS server.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.94

hwApProtectAcIPv6Addr

OCTET STRING

This object indicates the IPv6 address of the standby AC.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.95

hwApLineatePortCfgMtu

Integer32

The value of this object identifies the maximum transmit unit (MTU) of the AP wired interface.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.96

hwApLineatePortMacAddress

OCTET STRING

The value of this object identifies the MAC address of the AP wired interface.

read-only

current

1.3.6.1.4.1.2011.6.139.2.6.1.1.97

hwApAccessBalanceSwitch

INTEGER

This object indicates whether to enable load balancing on an AP.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.98

hwApNatIpAddress

OCTET STRING

This object indicates the IP address of the NAT server.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.1.1.99

hwApAttackFloodQuietTime

INTEGER32

The value of this object identifies the quiet time for flood attack packets.

The value ranges from 60 to 3600, in seconds.

read-write

current

1.3.6.1.4.1.2011.6.139.2.6.1.1.100

hwApAttackPskQuietTime

INTEGER32

The value of this object identifies the quiet time for PSK attack packets.

The value ranges from 60 to 3600, in seconds.

read-write

current

1.3.6.1.4.1.2011.6.139.2.6.1.1.101

hwApAttackWeakivQuietTime

INTEGER32

The value of this object identifies the quiet time for weak IV attack packets.

The value ranges from 60 to 3600, in seconds.

read-write

current

1.3.6.1.4.1.2011.6.139.2.6.1.1.102

hwApAttackSpoofQuietTime

INTEGER32

The value of this object identifies the quiet time for spoof attack packets.

The value ranges from 60 to 3600, in seconds.

read-write

current

1.3.6.1.4.1.2011.6.139.2.6.1.1.103

hwApBootCountTotal

INTEGER32

The value of this object identifies the number of times the AP is restarted.

read-create

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.6.139.2.6.1.1.104

hwApBootCountPowerOff

INTEGER32

The value of this object identifies the number of times the AP is restarted due to a power failure.

read-create

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.6.139.2.6.1.1.105

hwApBootCountRowStatus

RowStatus

This object clears statistics on AP restarts.

read-only

current

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be changed.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 127999

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next