No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Object Name



Implemented Specifications


  • ospfRouterId
  • ospfNbrIpAddr
  • ospfNbrAddressLessIndex
  • ospfNbrRtrId
  • ospfNbrState

An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (for example, goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (for example, 2-Way or Full). When a neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be generated by the designated router.A designated router transitioning to Down will be noted by ospfIfStateChange.

This object is implemented as defined in the corresponding MIB files.

Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 127707

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next