No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwDccRuleTable

hwDccRuleTable

This table describes parameters in access control rules of the dial control center (DCC).

The index of this table is hwDccRuleEntry.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.244.1.2.1.1

hwDialRule

ULONG

Read-only

This object indicates the dialer access group number. This value is the same as that of group-number in the dialer-group command.

The value is an integer and varies according to the device types.
  • AR120&AR150&AR160&AR200, AR1200, AR2201-48FE, AR2202-48FE, AR2204-48GE-P, AR2204-51GE-P, AR2204-24GE, AR2204-27GE-P, AR2204-27GE, AR2204E, and AR2204: 1 to 128.
  • AR2220E, AR2220, AR2240, AR2240C, AR3260 and AR3670: 1 to 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.2.1.11

hwDialProType

ULONG

Read-only

This object indicates the name of a protocol in ACL:
  • 0: non-IP protocol
  • 3: IP
  • 5:IPv6

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.244.1.2.1.12

hwDialAclNumber

ULONG

Read-only

This object indicates the ACL number referenced by the dialer-rule command.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

None.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 113030

Downloads: 677

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next