No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipv6NetToMediaTable

ipv6NetToMediaTable

This table is used to describe the mapping between the physical address and the IPv6 address on the network device.

The indexes of this table are ipv6IfIndex and ipv6NetToMediaNetAddress.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.55.1.12.1.1

ipv6NetToMediaNetAddress

Ipv6Address

Not-accessible

This object indicates the IPv6 address corresponding to the media dependent physical address.

The fixed length is 16 bytes.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.12.1.2

ipv6NetToMediaPhysAddress

PhysAddress

Read-only

This object indicates the media-dependent physical address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.12.1.3

ipv6NetToMediaType

INTEGER{other(1),dynamic(2),static(3),local(4)}

Read-only

The value of this object identifies the mapping type.

The values are as follows:

  • other(1)
  • dynamic(2): the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol
  • static(3): the mapping has been statically configured
  • local(4): the mapping is provided for an entity's own interface address

Currently, the return value dynamic(2) and static(3) are supported only.

1.3.6.1.2.1.55.1.12.1.4

ipv6IfNetToMediaState

INTEGER{reachable(1),stale(2),delay(3),probe(4),invalid(5),unknown(6)}

Read-only

The value of this object identifies the status of the neighbor unreachability detection for the interface when the address mapping in this entry is used.

Currently, the return value invaild(5) is not supported.

1.3.6.1.2.1.55.1.12.1.5

ipv6IfNetToMediaLastUpdated

TimeStamp

Read-only

The value of this object identifies the value of sysUpTime when this entry is last updated.

If this entry was updated prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.55.1.12.1.6

ipv6NetToMediaValid

TruthValue

Read-write

Setting this object to the value 'false(2)' has the effect of invalidating the corresponding entry in the ipv6NetToMediaTable.

That is, it effectively disassociates the interface identified with said entry from the mapping identified with said entry.

It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use.

Proper interpretation of such entries requires examination of the relevant ipv6NetToMediaValid object.

Currently, the maximum access is read-only; the return value true(1) is supported only.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The interface supports the IPv6 function. Some interfaces do not need this mapping table. If all the interfaces do not need the mapping table, the mapping table is empty; that is, the number of entries is 0.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 126494

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next