No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hlHostControlTable

hlHostControlTable

This table is the host control table.

The index of this table is hlHostControlIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.16.14.1.1.1

hlHostControlIndex

Integer32 (1..65535)

Not-accessible

An index that uniquely identifies an entry in the hlHostControlTable. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hlHostControlTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.16.14.1.1.2

hlHostControlDataSource

DataSource

Read-create

The source of data for the associated host tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.16.14.1.1.3

hlHostControlNlDroppedFrames

Counter32

Read-only

The total number of frames which were received by the probe and therefore not accounted for in the StatsDropEvents, but for which the probe chose not to count for the associated nlHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors.

Note that if the hlHostControlTable is inactive because no protocols are enabled in the protocol directory, this value should be 0.

Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.16.14.1.1.4

hlHostControlNlInserts

Counter32

Read-only

The number of times an nlHost entry has been inserted into the nlHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2.

To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time.

Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.16.14.1.1.5

hlHostControlNlDeletes

Counter32

Read-only

The number of times an nlHost entry has been deleted from the nlHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.

To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time.

This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.16.14.1.1.6

hlHostControlNlMaxDesiredEntries

Integer32 (1..100000)

Read-create

The maximum number of entries that are desired in the hlHostControlTable on behalf of this control entry.

Currently, the value ranges from 1 to 100000. The default value is 50.

1.3.6.1.2.1.16.14.1.1.11

hlHostControlOwner

OwnerString

Read-create

The entity that configured this entry and is therefore using the resources assigned to it.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.16.14.1.1.12

hlHostControlStatus

RowStatus

Read-create

The status of this hlHostControlEntry.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The creation restrictions are as follows:

  • When creating a row, you must set the value of hlHostControlDataSource, that is, the index value of the interface to be monitored. The interface corresponding to this value must exist on the proxy device. This value must be unique in the table. You must set the value of hlHostControlNlMaxDesiredEntries to non-zero. If you do not set this object, use the default value 50. hlHostControlOwner is optional. It is null if you do not set it.

  • When creating a row, you must set the value of hlHostControlStatus to createAndGo(4). You cannot set it to createAndWait(5). That is, when creating a row, you must configure all mandatory objects.

Modification Restriction

The modification restrictions are as follows:

  • You must set the value of hlHostControlNlMaxDesiredEntries to non-zero.

  • If the value of hlHostControlStatus is not active(1), all relevant entries in nlHostTable are deleted.

  • If the value of hlHostControlStatus is active(1), you cannot modify the value of hlHostControlDataSource.

  • When the interface corresponding to hlHostControlDataSource is on the interface board pulled out, you need to modify the value of hlHostControlStatus to NotInService(2) if the value of hlHostControlStatus is active(1). In this case, this row still exists. It can be deleted but cannot be modified. When the interface board is plugged in, the value of hlHostControlStatus changes to active(1).

  • If the value of hlHostControlNlMaxDesiredEntriesr is modified to a number smaller than the number of current entries, you need to delete some entries and make the number of entries equal to this value. You need to delete the entry according to the change time of the entry, that is, delete the entry that changes earliest.

Deletion Restriction

The deletion restrictions are as follows:

  • If you set the value of hlHostControlStatus to destroy(6), the row is deleted from the table. Before deletion, all relevant entries in nlHostTable are deleted.

  • If the interface corresponding to hlHostControlDataSource in a row is deleted, this row is also deleted. Before deletion, all relevant entries in the nlHostTable are deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 121594

Downloads: 681

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next