No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nqaResultsTable

nqaResultsTable

This table is used to take statistics of the test result of a test instance. It describes the general test information of a certain test instance.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaResultsIndex, and nqaResultsHopIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.1.1.1

nqaResultsIndex

Integer32 (0..'7FFFFFFF'h)

Not-accessible

The value of this object specifies the result table index and times of dispatching dependency tests. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.2

nqaResultsHopIndex

Integer32 (0..255)

Not-accessible

The value of this object specifies the hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.3

nqaResultsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)

Read-only

The value of this object specifies the status of test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.4

nqaResultsTestAttempts

Counter32

Read-only

The value of this object specifies the times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The value of this object MUST be started at 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.5

nqaResultsCurHopCount

Gauge32

Read-only

It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.6

nqaResultsCurProbeCount

Gauge32

Read-only

The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.7

nqaResultsRTDOverThresholds

Counter32

Read-only

The value of this object specifies the times of successful statistics test RTD (Round Trip Delay) over the threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.8

nqaResultsSumCompletionTime

Counter32

Read-only

The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.9

nqaResultsSumCompletionTime2Low

Counter32

Read-only

The value of this object specifies the low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.10

nqaResultsSumCompletionTime2High

Counter32

Read-only

The value of this object specifies the high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.11

nqaResultsCompletionTimeMin

Gauge32

Read-only

The value of this object specifies the minimum RTT of all packets for executing a test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.12

nqaResultsCompletionTimeMax

Gauge32

Read-only

The value of this object specifies the maximum RTT of all packets in executing a test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.13

nqaResultsDisconnects

Counter32

Read-only

The times of consecutive failures. For connectionless protocol type of test, this number should be zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.14

nqaResultsTimeouts

Counter32

Read-only

The value of this object specifies the number of occasions when an NQA operation is not completed before a timeout occurs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.15

nqaResultsBusies

Counter32

Read-only

The value of this object specifies the times of failure to apply resource due to the busy system. such as apply memory or create socket failure.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.16

nqaResultsNoConnections

Counter32

Read-only

The value of this object specifies the number of occasions when an NQA operation could not be initiated because the connection to the target has not been established.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.17

nqaResultsSequenceErrors

Counter32

Read-only

The value of this object specifies the number of NQA operation completions received with an unexpected sequence identifier.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.18

nqaResultsDrops

Counter32

Read-only

The value of this object specifies the times probes of the test dropped due to sending or connecting failure.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.19

nqaResultsAddressType

InetAddress

Read-only

The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.20

nqaResultsAddress

InetAddress

Read-only

The value of this object specifies the destination address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.21

nqaResultsProbeResponses

Counter32

Read-only

The value of this object specifies the number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.22

nqaResultsSentProbes

Counter32

Read-only

This object indicates the number of probes currently sent. The value of this object MUST be reported as 0 when no probes have been sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.23

nqaResultsLastGoodProbe

DateAndTime

Read-only

This object indicates the time when the last successful probe response is received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.24

nqaResultsLastGoodPath

DateAndTime

Read-only

This object indicates the time when the last complete traceroute path is obtained.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.25

nqaResultsTestFinished

INTEGER

  • noFinish(0)
  • finish(1)

Read-only

The value of this object identifies the status of a test instance.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.26

nqaResultsRttAvg

Gauge32

Read-Only

The value of this object identifies the average RTT

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.1.1.27

nqaResultsLostPacketRatio

Gauge32

Read-Only

The value of this object identifies the packet loss ratio.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The latest test results can be displayed only when all the following conditions are met:
  • A get operation is performed.
  • The test instance type is ICMP, UDP, or TCP.
  • The values of nqaResultsIndex and nqaResultsHopIndex are 0.
Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 120294

Downloads: 681

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next