No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIsisIntfBaseTable

hwIsisIntfBaseTable

This table is used to obtain and set the values of the objects in hwIsisIntfBaseTable associated with IS-IS.

The indexes of this table are hwIsisProcIdIndex and hwIsisInterfaceIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1

hwIsisInterfaceIndex

Unsigned32

Not-accessible

The value of this object identifies the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2

hwIsisEnableIPProtocol

Enumeration

Read-create

The value of this object identifies the status of IPv4 IS-IS on an interface:
  • enable(1): enables IPv4 IS-IS.
  • disable(2): disables IPv4 IS-IS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3

hwIsisEnableIPv6Protocol

Enumeration

Read-create

The value of this object identifies the status of IPv6 IS-IS on an interface:
  • enable(1): enables IPv6 IS-IS.
  • disable(2): disables IPv6 IS-IS.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4

hwIsisCircLevel

Enumeration

Read-create

The value of this object identifies the level of an interface:
  • level1(1): indicates Level-1.
  • level2(2): indicates Level-2.
  • level12(3): indicates Level-1-2.

By default, the interface is at Level-1-2.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5

hwIsisCircSimulation

Enumeration

Read-create

The value of this object identifies whether the broadcast interface is simulated as a P2P interface:
  • enable(1): indicates that the broadcast interface is simulated as a P2P interface.
  • disable(2): indicates that the broadcast interface is not simulated as a P2P interface.

By default, broadcast interfaces are not simulated as P2P interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6

hwIsisCircL1HelloInterval

Integer32

Read-create

The value of this object identifies the interval for sending Level-1 Hello PDUs. The value ranges from 3 to 255, in seconds. By default, the value is 10s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7

hwIsisCircL2HelloInterval

Integer32

Read-create

The value of this object identifies the interval for sending Level-2 Hello PDUs. The value ranges from 3 to 255, in seconds. By default, the value is 10s.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8

hwIsisCircL1HelloMultiplier

Integer32

Read-create

The value of this object identifies that the hold time of a Level-1 neighbor is a multiple of the interval for sending Level-1 Hello packets. The value ranges from 3 to 1000. By default, the value is 3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9

hwIsisCircL2HelloMultiplier

Integer32

Read-create

The value of this object identifies that the hold time of a Level-2 neighbor is a multiple of the interval for sending Level-2 Hello packets. The value ranges from 3 to 1000. By default, the value is 3.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.10

hwIsisCircL1AuthMode

Enumeration

Read-create

The value of this object identifies the mode of authenticating Level-1 Hello PDUs:

  • null(0): indicates that interface authentication is not configured.
  • md5(1): indicates that the password is encrypted through MD5 and then sent.
  • simple(2): indicates that the password is sent in simple text.
  • keychain(3): indicates that the keychain that varies with the time is encrypted through MD5 and then sent.

By default, interface authentication is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11

hwIsisCircL1AuthText

OctetString

Read-create

MD5
The value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of characters.
  • If the packet authentication mode is simple, the password is a string of 0 to 16 characters.
  • If the packet authentication mode is MD5, the password is a string of 0 to 392 characters.
  • If the packet authentication mode is keychain, the name is a string of 0 to 47 characters.

The length 0 indicates that the authentication password of Level-1 Hello packets is not configured.

When read, hwIsisCircL1AuthText always returns an octet string of length zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12

hwIsisCircL1AuthSendOnly

Enumeration

Read-create

The value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs:
  • enable(1): indicates that the passwords in only the sent PDUs are authenticated but not in the received PDUs.
  • disable(2): indicates that the passwords in both sent and received PDUs are authenticated.

By default, the passwords in both sent and received PDUs are authenticated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13

hwIsisCircL1AuthCode

Enumeration

Read-create

The value of this object identifies the authentication code of Level-1 Hello PDUs:
  • none(0): indicates that no authentication is configured.
  • osi(10): indicates OSI authentication.
  • ip(133): indicates IP authentication.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14

hwIsisCircL2AuthMode

Enumeration

Read-create

The value of this object identifies the mode of authenticating Level-2 Hello PDUs:

  • null(0): indicates that interface authentication is not configured.
  • md5(1): indicates that password is encrypted through MD5 and then sent.
  • simple(2): indicates that the password is sent in simple text.
  • keychain(3): indicates that the keychain that varies with the time is encrypted through MD5 and then sent.

By default, interface authentication is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15

hwIsisCircL2AuthText

OctetString

Read-create

The value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of characters.
  • If the packet authentication mode is simple, the password is a string of 0 to 16 characters.
  • If the packet authentication mode is MD5, the password is a string of 0 to 392 characters.
  • If the packet authentication mode is keychain, the name is a string of 0 to 47 characters.

The length 0 indicates that the authentication password of Level-2 Hello packets is not configured.

When read, hwIsisCircL2AuthText always returns an octet string of length zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16

hwIsisCircL2AuthSendOnly

Enumeration

Read-create

The value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs:
  • enable(1): indicates that the passwords in only the sent PDUs are authenticated but not in the received PDUs.
  • disable(2): indicates that the password is authenticated in the PDUs that are both sent and received.

By default, the passwords in both sent and received PDUs are authenticated.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17

hwIsisCircL2AuthCode

Enumeration

Read-create

The value of this object identifies the authentication code of Level-2 Hello PDUs:
  • none(0): indicates that no authentication is configured.
  • osi(10): indicates OSI authentication.
  • ip(133): indicates IP authentication.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18

hwIsisCircLdpSync

Enumeration

Read-create

The value of this object identifies the status of synchronization of IS-IS and LDP:
  • enable(1): enables synchronization of IS-IS and LDP.
  • disable(2): disables synchronization of IS-IS and LDP.

By default, synchronization of IS-IS and LDP is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19

hwIsisCircLdpSyncHoldDown

Integer32

Read-create

The value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP. The value ranges from -1 to 65535, in seconds. By default, the value is 10s.

The value -1 indicates that no timeout period is set.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20

hwIsisCircLdpHldMaxCost

Integer32

Read-create

The value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP. The value ranges from -1 to 65536, in seconds. By default, the value is 10s.

The value -1 indicates that no timeout period is set.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21

hwIsisCircSmallHello

Enumeration

Read-create

The value of this object identifies whether IS-IS sends small Hello PDUs without the padding field:
  • enable(1): indicates that IS-IS sends small Hello PDUs without the padding field.
  • disable(2): indicates that IS-IS does not send small Hello PDUs without the padding field.

By default, the function is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22

hwIsisCircIpIgnore

Enumeration

Read-create

The value of this object identifies whether the segment in an IP address is checked:
  • enable(1): indicates that the segment in an IP address is not checked.
  • disable(2): indicates that the segment in an IP address is checked.

By default, the segment in an IP address is checked.

This object applies to only P2P interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24

hwIsisCircPadHello

Enumeration

Read-create

The value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field:
  • enable(1): indicates that IS-IS sends standard Hello PDUs with the padding field.
  • disable(2): indicates that IS-IS does not send standard Hello PDUs with the padding field.

By default, the function is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25

hwIsisCircLspRetransInterval

Integer32

Read-create

The value of this object identifies the interval for retransmitting LSPs. The value ranges from 1 to 300, in seconds. The default value is 5.

This object applies to only P2P interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26

hwIsisL1CsnpTimerValue

Integer32

Read-create

The value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface. The value ranges from 1 to 65535, in seconds. The default value is 10.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27

hwIsisL2CsnpTimerValue

Integer32

Read-create

The value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface. The value ranges from 1 to 65535, in seconds. The default value is 10.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28

hwIsisLspThrottleInterval

Integer32

Read-create

The value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to 10000, in milliseconds. By default, the value is 50.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29

hwIsisLspThrottleCount

Integer32

Read-create

The value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000. By default, it is 10.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30

hwIsisCircL1DisPriority

Integer32

Read-create

The value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface. The value ranges from 0 to 127. By default, it is 64.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31

hwIsisCircL2DisPriority

Integer32

Read-create

The value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface. The value ranges from 0 to 127. By default, it is 64.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32

hwIsisCircSilent

Enumeration

Read-create

The value of this object identifies whether the status of an IS-IS interface is set to silent.
  • enable(1): indicates that the status of IS-IS interface is set to silent.
  • disable(2): indicates that the status of IS-IS interface is not set to silent.

By default, the function is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33

hwIsisCircMeshGroup

Unsigned32

Read-create

The value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-group ID is not set.

By default, the mesh-group ID is not set.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34

hwIsisCircMeshBlock

Enumeration

Read-create

The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. The value of this object can be:
  • enable(1): enables the mesh block function.
  • disable(2): disables the mesh block function.

By default, the function is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35

hwIsisCircDisName

OctetString

Read-create

The value of this object identifies the DIS name of an interface. The configuration is applicable to only a broadcast interface. The value is a string of 0 to 64 characters. Value 0 indicates that the DIS name is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36

hwIsisCircPppNego

Enumeration

Read-create

The value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces:
  • none(0): indicates that the negotiation mode used to establish a neighbor relationship is not specified.
  • twoWay(1): indicates that a neighbor relationship is set up through negotiations in two-way handshake mode.
  • threeWay(2): indicates that a neighbor relationship is set up by means of negotiations in backward-compatible three-way handshake mode.
  • threeWayOnly(3): indicates that a neighbor relationship is set up through negotiations in three-way handshake mode and the backward compatibility is not supported.

By default, the negotiation in backward-compatible three-way handshake mode is used. Backward compatibility means that if a peer supports only two-way handshake, the neighbor relationship is set up by means of two-way handshake.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37

hwIsisCircPppOsicpCheck

Enumeration

Read-create

The value of this object identifies whether the OSICP check is required:
  • enable(1): enables the OSICP check.
  • disable(2): disables the OSICP check.

By default, the function is disabled.

This object applies to only P2P interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38

hwIsisIntfRowStatus

RowStatus

Read-create

The value of this object identifies the setting of two values:
  • createAndGo(4): creates one row.
  • destroy(6): deletes one row.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.39

hwIsisCircL1AuthKeychainName

OctetString

read-create

The value of this object identifies the keychain name of Level-1 Hello packets.

The keychain name is a string of 0 to 47 characters. The length 0 indicates that the authentication password of Level-1 Hello packets is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.40

hwIsisCircL2AuthKeychainName

OctetString

read-create

The value of this object identifies the keychain name of Level-2 Hello packets.

The keychain name is a string of 0 to 47 characters. The length 0 indicates that the authentication password of Level-2 Hello packets is not configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.24.2.1.21.1.41

hwIsisCircStrictSnpaCheckEnable

Integer32

read-create

The value of this object identifies whether the snpa check of lsp and snp is required. This object applies to only simulated P2P interfaces.

  • 1: enable
  • 2: disable

By default, the function is disabled.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

If the entry to be created already exists, inconsistentValue is returned.

IPv4 IS-IS is enabled by default when entries are created. In this case, If the value of hwIsisEnableIPv6Protocol is enable(1), IPv4 IS-IS is enabled; if the values of hwIsisEnableIPProtocol and hwIsisEnableIPv6Protocol are disable(2), an error is returned.

Modification Restriction

When an IS-IS process is in the Disable state or the system is in the memory shortage, you cannot perform the Set operation on this table.

When the data of multiple entries is delivered in the same message block, if the data of one entry is incorrect, the data of the entire message block cannot be delivered to the IS-IS module.

The value of hwIsisCircLdpHldMaxCost ranges from 0 to 65536. The value 65536 indicates the infinite parameter.

hwIsisCircSimulation supports the Set operation on a broadcast interface or a P2P interface that is simulated as a broadcast interface, but not on a P2P interface.

The value of hwIsisCircLspRetransInterval is 5 on a broadcast network and the Set operation is not supported on a broadcast interface but is supported on a P2P interface.

The value of hwIsisCircDisPriority on a P2P interface is 0 through the Get operation, whereas this object does not support the Set operation. The value of hwIsisCircDisName on a P2P interface is "zero-length" through the Get operation, whereas the object does not support the Set operation.

The value of hwIsisCircPppNego on a broadcast interface is "3way-only" through the Get operation, whereas the object does not support the Set operation. The Get operation is performed only on P2P interfaces.

If the values of the authentication modes of both hwIsisCircL1AuthMode and hwIsisCircL2AuthMode are 0, it indicates that authentication is not configured. hwIsisProcAuthPasswordName, hwIsisProcAuthPacketAuthMode, and hwIsisProcAuthCode can be configured only when they are all bound to hwIsisProcAuthType. You cannot configure a single object separately. The value of hwIsisCircL2AuthMode is the same as the value of hwIsisCircL1AuthMode.

The value of hwIsisCircLspThrottleCount must be set together with the value of hwIsisCircLspThrottleInterval; otherwise, the setting fails.

When the value of hwIsisCircLdpSync is disable(2), the values of hwIsisCircLdpSyncHoldDown and hwIsisCircLdpHldMaxCost cannot be modified. The values of hwIsisCircLdpSyncHoldDown and hwIsisCircLdpHldMaxCost can be modified only when the value of hwIsisCircLdpSync is enable(1).

On a P2P interface or a simulated P2P interface, hwIsisCircL1HelloInterval, hwIsisL1CsnpTimerValue, hwIsisCircL1HelloMultiplier and all authentication parameters of Level-1 interfaces support the Set operation; if the Set operation is performed on hwIsisCircL2HelloInterval, an error prompt is displayed.

If the value of hwIsisCircMeshGroup is set to a non-zero value, the value of hwIsisCircMeshBlock is automatically set to disable.

If the value of hwIsisCircMeshBlock is set to enable, the value of hwIsisCircMeshGroup is automatically set to 0.

Deletion Restriction

The entries in this table can be deleted.

If the entry to be deleted does not exist, noError is returned.

If the destroy operation is available, only the destroy operation is performed and other operations are not performed or checked.

Access Restriction

When the Get operation is performed on hwIsisIntfRowStatus, only the active state is obtained. If the row to be read does not exist, "NO SUCH INSTANCE" is returned.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 111453

Downloads: 673

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next