No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwBondingPriorityTable

hwBondingPriorityTable

This table describes information about the Priority tunnel bandwidth, delay, and bypass traffic in the inbound and outbound directions.

The index of this table is hwBondingPriorityIfindex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.337.2.1.1.1

hwBondingPriorityIfindex Unsigned32 not-accessible This object indicates the Priority tunnel index. This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.2

hwBondingPriorityState Integer32 read-only This object indicates the Priority tunnel status. This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.3

hwBondingPriorityBandwidth Counter64 read-only This object indicates the Priority tunnel bandwidth. This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.4

hwBondingPriorityNetRTT Integer32 read-only

This object indicates the Priority tunnel delay.

When no Priority tunnel is established, the delay is -1. After a Priority tunnel is established, the value depends on the detected delay.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.5

hwInBondingPriorityBpsBypass Counter64 read-only This object indicates incoming bypass traffic over the Priority tunnel, in bit/s. This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.6

hwInBondingPriorityPpsBypass Counter64 read-only This object indicates incoming bypass traffic over the Priority tunnel, in pps. This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.7

hwOutBondingPriorityBpsBypass Counter64 read-only This object indicates outgoing bypass traffic over the Priority tunnel, in bit/s. This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.337.2.1.1.8

hwOutBondingPriorityPpsBypass Counter64 read-only This object indicates outgoing bypass traffic over the Priority tunnel, in pps. This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 97698

Downloads: 648

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next