No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mplsLdpPeerTable

mplsLdpPeerTable

This table describes information about LDP peers.

The indexes of this table are mplsLdpEntityLdpId, mplsLdpEntityIndex and mplsLdpPeerLdpId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.166.4.1.3.2.1.1

mplsLdpPeerLdpId

MplsLdpIdentifier

Not-accessible

The LDP identifier of this LDP Peer.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.4.1.3.2.1.2

mplsLdpPeerLabelDistMethod

MplsLabelDistributionMethod

Read-only

For any given LDP session, the method of label distribution must be specified.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.4.1.3.2.1.3

mplsLdpPeerPathVectorLimit

Integer32 (0..255)

Read-only

If the value of this object is 0 (zero), Loop Detection for Path Vectors for this Peer is disabled.

Otherwise, if this Detection has a value greater than zero, then Loop Detection for Path Vectors for this Peer is enabled and the Path Vector Limit is this value. "REFERENCE" RFC3036, LDP Specification, Section 2.8 Loop Detection, Section 3.4.5 Path Vector TLV.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.4.1.3.2.1.4

mplsLdpPeerTransportAddrType

InetAddressType

Read-only

The type of the Internet address for the mplsLdpPeerTransportAddr object.

The LDP specification describes this as being either an IPv4 Transport Address or IPv6 Transport Address which is used in opening the LDP session's TCP connection, or if the optional TLV is not present, then this is the IPv4/IPv6 source address for the UPD packet carrying the Hellos.

This object specifies how the value of the mplsLdpPeerTransportAddr object should be interpreted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.4.1.3.2.1.5

mplsLdpPeerTransportAddr

InetAddress

Read-only

The Internet address advertised by the peer in the Hello Message or the Hello source address.

The type of this address is specified by the value of the mplsLdpPeerTransportAddrType object.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The peer relationship must be set up between this device and neighbor device.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 98117

Downloads: 650

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next