No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwMacApLineatePortTable(for FAT AP)

hwMacApLineatePortTable(for FAT AP)

In this table, you can modify or query the attributes of the wired ports on an AP.

The indexes of this table are hwApMac and hwMacApLineatePortIndex.

OID

Object Name

Syntax

Description

Access

Status

1.3.6.1.4.1.2011.6.139.2.6.10.1.8

hwMacApMultiLineatePortMode

Integer32

This object indicates the working mode of the AP interface:
  • root(1): root mode
  • endpoint(2): endpoint mode
By default, the AP interface works in root mode.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.9

hwMacApMultiLineatePortUserIsolate

Integer32

This object indicates whether user isolation is enabled on interfaces.
  • disable(1): user isolation is enabled on interfaces.
  • enable(2): user isolation is disabled on interfaces.
By default, user isolation is disabled on interfaces.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.10

hwMacApMultiLineatePortStpEnable

Integer32

This object indicates whether STP is enabled on interfaces.
  • disable(1): STP is enabled on interfaces.
  • enable(2): STP is disabled on interfaces.
By default, STP is disabled on interfaces.

APs with two GE ports support the object only when the two ports are not bound to an Eth-Trunk port.

read-only

current

1.3.6.1.4.1.2011.6.139.2.6.10.1.11

hwMacApMultiLineatePortVlanTagged

OCTET STRING

This object indicates whether a tagged VLAN ID is configured on the interface. By default, no tagged VLAN ID is configured on the interface.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.12

hwMacApMultiLineatePortVlanUntagged

OCTET STRING

This object indicates whether an untagged VLAN ID is configured on the interface. By default, no untagged VLAN ID is configured on the interface.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.13

hwMacApMultiLineatePortPvidVlan

Integer32

This object indicates whether a PVID VLAN is configured on the interface. By default, no PVID VLAN is configured on the interface.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.14

hwMacApMultiLineatePortCRCErrorHighThreshold

Integer32

The value of this object identifies the alarm threshold for CRC errors.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.15

hwMacApMultiLineatePortCRCErrorLowThreshold

Integer32

The value of this object identifies the clear alarm threshold for CRC errors.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.16

hwMacApMultiLineatePortCRCErrorSwitch

Integer32

This object indicates the alarm function for CRC errors.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.17

hwMacApLineatePortAclNumInbound

Integer32

The value of this object identifies the number of the ACL configured to filter incoming IPv4 packets on a wired-side port of an AP.

The value ranges from 3000 to 3031 or from 4000 to 4031.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchInbound object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.18

hwMacApLineatePortAclNumOutbound

Integer32

The value of this object identifies the number of the ACL configured to filter outgoing IPv4 packets on a wired-side port of an AP.

The value ranges from 3000 to 3031 or from 4000 to 4031.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchOutbound object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.19

hwMacApLineatePortAclNameInbound

OCTET STRING

This object indicates the name of the ACL configured to filter incoming IPv4 packets on a wired-side port of an AP.

The value is a string of 1 to 31 characters.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchInbound object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.20

hwMacApLineatePortAclNameOutbound

OCTET STRING

This object indicates the name of the ACL configured to filter outgoing IPv4 packets on a wired-side port of an AP.

The value is a string of 1 to 31 characters.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchOutbound object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.21

hwMacApLineatePortAclSwitchInbound

Integer32

The value of this object identifies whether to enable IPv4 packet filtering in the inbound direction on a wired-side port of an AP.
  • disabled(1): disable IPv6 packet filtering in the inbound direction.
  • enabled(2): enable IPv6 packet filtering in the inbound direction.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.22

hwMacApLineatePortAclSwitchOutbound

Integer32

The value of this object identifies whether to enable IPv4 packet filtering in the outbound direction on a wired-side port of an AP.
  • disabled(1): disable IPv6 packet filtering in the outbound direction.
  • enabled(2): enable IPv6 packet filtering in the outbound direction.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.23

hwMacApLineatePortAclNumInboundIPV6

Integer32

The value of this object identifies the number of the ACL configured to filter incoming IPv6 packets on a wired-side port of an AP.

The value ranges from 3000 to 3031.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchInboundIPV6 object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.24

hwMacApLineatePortAclNumOutboundIPV6

Integer32

The value of this object identifies the number of the ACL configured to filter outgoing IPv6 packets on a wired-side port of an AP.

The value ranges from 3000 to 3031.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchOutboundIPV6 object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.25

hwMacApLineatePortAclNameInboundIPV6

OCTET STRING

This object indicates the name of the ACL configured to filter incoming IPv6 packets on a wired-side port of an AP.

The value is a string of 1 to 31 characters.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchInboundIPV6 object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.26

hwMacApLineatePortAclNameOutboundIPV6

OCTET STRING

This object indicates the name of the ACL configured to filter outgoing IPv6 packets on a wired-side port of an AP.

The value is a string of 1 to 31 characters.

NOTE:

This object is valid only when it is set together with the hwMacApLineatePortAclSwitchOutboundIPV6 object.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.27

hwMacApLineatePortAclSwitchInboundIPV6

Integer32

The value of this object identifies whether to enable IPv6 packet filtering in the inbound direction on a wired-side port of an AP.
  • disabled(1): disable IPv6 packet filtering in the inbound direction.
  • enabled(2): enable IPv6 packet filtering in the inbound direction.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.28

hwMacApLineatePortAclSwitchOutboundIPV6

Integer32

The value of this object identifies whether to enable IPv6 packet filtering in the outbound direction on a wired-side port of an AP.
  • disabled(1): disable IPv6 packet filtering in the outbound direction.
  • enabled(2): enable IPv6 packet filtering in the outbound direction.

Read-write

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.29

hwMacApMultiLineatePortIsAddInTrunk

INTEGER

The value of this object identifies whether the AP wired interface is added to a trunk.
  • 0: the AP wired interface is added to a trunk.
  • 1: the AP wired interface is removed from a trunk.

Read-only

Current

1.3.6.1.4.1.2011.6.139.2.6.10.1.30

hwMacApMultiLineatePortAddedOrExitTrunkID

INTEGER

The value of this object identifies the ID of the trunk that the AP wired interface is added to or removed from.

Read-write

Current

Creation Restriction

No entry can be created in this table.

Modification Restriction

No entry can be modified in this table.

Deletion Restriction

No entry can be deleted in this table.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 124776

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next