No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwDhcpSnpCfgTable

hwDhcpSnpCfgTable

This table lists configuration parameters of DHCP snooping.

The indexes of this table are hwDhcpSnpIfIndex and hwDhcpSnpVlanIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.112.1.13.1.1

hwDhcpSnpIfIndex

InterfaceIndexOrZero

Not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.2

hwDhcpSnpVlanIndex

VlanIndex

Not-accessible

This object indicates the VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.5

hwDhcpSnpEnable

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether DHCP snooping is enabled.

By default, its value is disable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.6

hwDhcpTrusted

INTEGER{ trusted ( 1 ), untrusted ( 0 ) }

Read-create

This object identifies whether the Trusted function is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.7

hwDhcpOption82Insert

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object is used to insert Option 82 to DHCP packets.

By default, its value is disable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.8

hwDhcpOption82Rebuild

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the Option82 rebuild function of DHCP snooping is enabled.

By default, its value is disable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.9

hwDhcpChaddrCheck

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether checking the consistency of CHADDR and SRC MAC is enabled.

By default, its value is disable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.10

hwDhcpChaddrAlarmThreshold

Integer ( 32 bit ) ( 1..1000 )

Read-create

This object identifies the alarm threshold for the CHADDR check.

By default, its value is 100.

NOTE:

This object is valid only after the hwDhcpChaddrAlarmEnable object is set to enable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.11

hwDhcpChaddrAlarmEnable

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the alarm function is enabled for the CHADDR check.

By default, its value is disable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.12

hwDhcpArpCheck

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the ARP packet check is enabled.

By default, its value is disable.

NOTE:

This object is valid only after the hwDhcpSnpEnable object is set to enable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.13

hwDhcpSnpBindTblNomatchedArpAction

INTEGER{ forward ( 0 ), discard ( 1 ) }

Read-only

This object identifies the method to process the ARP packets that do not match the DHCP snoop binding table in the interface or VLAN view. By default, its value is discard.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.14

hwDhcpArpAlarmThreshold

Integer ( 32 bit ) ( 1..1000 )

Read-create

This object identifies the alarm threshold for the ARP packet check.

By default, its value is 100.

NOTE:

This object is valid only after the hwDhcpArpAlarmEnable object is set to enable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.15

hwDhcpArpAlarmEnable

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the alarm function is enabled for the ARP packet check. By default, its value is disable.

NOTE:

This object is valid only after the hwDhcpArpCheck object is set to enable.

This object is not supported on the VLAN.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.112.1.13.1.16

hwDhcpIpCheck

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the IP packet check is enabled.

By default, its value is disable.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.112.1.13.1.17

hwDhcpSnpBindTblNomatchedIpAction

INTEGER{ forward ( 0 ), discard ( 1 ) }

Read-only

This object identifies the method to process IP packets that do not match the DHCP snooping binding table in the interface or VLAN view.

By default, its value is discard.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.18

hwDhcpIpAlarmThreshold

Integer ( 32 bit ) ( 1..1000 )

Read-create

This object identifies the alarm threshold for the IP packet check.

By default, its value is 100.

NOTE:

This object is valid only after the hwDhcpIpAlarmEnable object is set to enable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.19

hwDhcpIpAlarmEnable

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the alarm function is enabled for the IP packet check.

By default, its value is disable.

NOTE:

This object is valid only after the hwDhcpIpCheck object is set to enable.

This object is not supported on the VLAN.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.112.1.13.1.20

hwDhcpUntrustReplyAlarmThreshold

Integer ( 32 bit ) ( 1..1000 )

Read-create

This object identifies the alarm threshold for DHCP reply packets on an Untrusted interface.

By default, its value is 100.

NOTE:

This object is valid only after the hwDhcpUntrustReplyAlarmEnable object is set to enable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.21

hwDhcpUntrustReplyAlarmEnable

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the alarm function is enabled for the DHCP reply packets on an Untrusted interface.

By default, its value is disable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.22

hwDhcpSnpBindTblCheck

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the check on the matching of IP address and MAC address with the binding table is enabled. By default, its value is disable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.23

hwDhcpSnpBindTblAlarmThreshold

Integer ( 32 bit ) ( 1..1000 )

Read-create

This object identifies the alarm threshold for the IP and MAC binding check.

By default, its value is 100.

NOTE:

This object is valid only after the hwDhcpSnpBindTblAlarmEnable object is set to enable.

This object is not supported on the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.24

hwDhcpSnpBindTblAlarmEnable

INTEGER{ enable ( 1 ), disable ( 0 ) }

Read-create

This object identifies whether the alarm function is enabled for the IP and MAC binding check.

By default, its value is disable.

NOTE:

This object is valid only after the hwDhcpSnpBindTblCheck object is set to enable.

This object is not supported on the VLAN.

1.3.6.1.4.1.2011.5.25.112.1.13.1.30

hwDhcpSnpCfgTblRowStatus

RowStatus

Read-create

This object identifies the status of the row.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.112.1.13.1.31

hwDhcpPktIfRateCheck

INTEGER{ enable ( 1 ), disable ( 2 ) }

Read-create

This object enables DHCP rate limit check on an interface. The default value is disable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.32

hwDhcpPktIfRate

Integer ( 32 bit ) ( 1..100 )

Read-create

This object indicates the maximum rate of DHCP packets on an interface. The default value is 100.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.33

hwDhcpPktIfRateAlarmThreshold

Integer ( 32 bit ) ( 1..1000 )

Read-create

This object indicates the DHCP rate alarm threshold on an interface. The default value is 100.

NOTE:

This object is valid only after the hwDhcpPktIfRateAlarmEnable object is set to enable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.34

hwDhcpPktIfRateAlarmEnable

INTEGER{ enable ( 1 ), disable ( 2 ) }

Read-create

This object enables DHCP rate alarm on an interface. The default value is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.112.1.13.1.35

hwDhcpSnpIfVlanOption82RemoteID

DisplayString(1..63)

Read-create

This object configures the format of the remote-ID in the option 82 field inserted in DHCP packets.

The length supported by MIB file is smaller than 63 characters.

1.3.6.1.4.1.2011.5.25.112.1.13.1.36

hwDhcpSnpIfVlanOption82CircuitID

DisplayString(1..63)

Read-create

This object configures the format of the circuit-ID in the option 82 field inserted in DHCP packets.

The length supported by MIB file is smaller than 63 characters.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restraint.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 125209

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next