No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipv6InterfaceTable

ipv6InterfaceTable

This table is mainly used to display detailed IPv6 information on each interface.

The index of this table is ipv6InterfaceIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.4.30.1.1

ipv6InterfaceIfIndex

InterfaceIndex

Not-accessible

The index value that uniquely identifies the interface to which this entry is applicable.

The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.30.1.2

ipv6InterfaceReasmMaxSize

Unsigned32 (1500..65535)

Read-only

The size of the largest IPv6 datagram that this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.30.1.3

ipv6InterfaceIdentifier

Ipv6AddressIfIdentifierTC

Read-only

The Interface Identifier for this interface.

The Interface Identifier is combined with an address prefix to form an interface address.

By default, the Interface Identifier is auto-configured according to the rules of the link type to which this interface is attached.

A zero length identifier may be used where appropriate. One possible example is a loopback interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.30.1.5

Ipv6InterfaceEnableStatus

INTEGER{

up(1),

down(2)

}

Read-write

The indication of whether IPv6 is enabled (up) or disabled (down) on this interface.

This object does not affect the state of the interface itself, only its connection to an IPv6 stack. The IF-MIB should be used to control the state of the interface.

When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.30.1.6

ipv6InterfaceReachableTime

Unsigned32

Read-only

The time a neighbor is considered reachable after receiving a reachability confirmation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.30.1.7

Ipv6InterfaceRetransmitTime

Unsigned32

Read-only

The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.30.1.8

ipv6InterfaceForwarding

INTEGER{

forwarding(1),-- acting as a router

notForwarding(2)-- NOT acting as a router

}

Read-write

The indication of whether this entity is acting as an IPv6 router on this interface with respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host).

This object is constrained by ipv6IpForwarding and is ignored if ipv6IpForwarding is set to notForwarding.

Those systems that do not provide per-interface control of the forwarding function should set this object to forwarding for all interfaces and allow the ipv6IpForwarding object to control the forwarding capability.

When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.

Currently, the maximum access is read-only.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

ipv6InterfaceIfIndex of this table is the same as ifIndex of the IF-MIB.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 120830

Downloads: 681

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next