No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3IfTable

ospfv3IfTable

The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.191.1.7.1.1

ospfv3IfIndex

Integer32

Not-accessible

The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.2

ospfv3IfInstId

Unsigned32 (0..255)

Not-accessible

Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.3

ospfv3IfAreaId

Unsigned32 (0...4294967295)

Read-create

A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.4

ospfv3IfType

INTEGER { broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5) }

Read-create

The OSPFv3 interface type.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.5

ospfv3IfAdminStatus

INTEGER { enabled(1), disabled(2) }

Read-create

The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3. DEFVAL { enabled }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.6

ospfv3IfRtrPriority

Integer32 (0..255)

Read-create

The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. DEFVAL { 1 }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.7

ospfv3IfTransitDelay

Unsigned32 (1..1800)

Read-create

The estimated number of seconds it takes to transmit a link state update packet over this interface. DEFVAL { 1 }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.8

ospfv3IfRetransInterval

Unsigned32 (1..1800)

Read-create

The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. DEFVAL { 5 }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.9

ospfv3IfHelloInterval

Integer32 (1..65535)

Read-create

The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. DEFVAL { 10 }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.10

ospfv3IfRtrDeadInterval

Unsigned32 (1...65535)

Read-create

The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. DEFVAL { 40 }.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.11

ospfv3IfPollInterval

Unsigned32

Read-create

The larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.12

ospfv3IfState

INTEGER { down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7), standby(8) }

Read-only

The OSPFv3 Interface State.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.13

ospfv3IfDesignatedRouter

Unsigned32 (1...4294967295)

Read-only

The Router ID of the Designated Router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.14

ospfv3IfBackupDesignatedRouter

Unsigned32 (1...4294967295)

Read-only

The Router ID of the Backup Designated Router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.15

ospfv3IfEvents

Counter32

Read-only

The number of times this OSPFv3 interface has changed its state or an error has occurred.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.16

ospfv3IfRowStatus

INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)}

Read-create

This object permits management of the table by facilitating actions such as row creation, construction and destruction.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.17

ospfv3IfDemand

TruthValue

Read-create

Indicates whether Demand OSPFv3 procedures should be performed on this interface.

Currently, the maximum access is read-only; the return value 2 is supported only.

1.3.6.1.2.1.191.1.7.1.18

ospfv3IfMetricValue

Integer32 (0..65535)

Read-create

The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the ospfv3ReferenceBandwidth object.

Currently, the maximum access is read-only.

1.3.6.1.2.1.191.1.7.1.19

ospfv3IfLinkScopeLsaCount

Gauge32

Read-only

The total number of Link-Scope link state advertisements in this link's link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.20

ospfv3IfLinkLsaCksumSum

Unsigned32

Read-only

The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.191.1.7.1.21

ospfv3IfDemandNbrProbe

TruthValue

Read-create

Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.

Currently, the maximum access is read-only.

Protocol support is not there, so default value is returned (FALSE).

1.3.6.1.2.1.191.1.7.1.22

ospfv3IfDemandNbrProbeRetransLimit

Unsigned32

Read-create

The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.

Currently, the maximum access is read-only.

Protocol support is not there, so default value is returned (10).

1.3.6.1.2.1.191.1.7.1.23

ospfv3IfDemandNbrProbeInterval

Unsigned32

Read-create

Defines how often the neighbor will be probed.

Currently, the maximum access is read-only.

Protocol support is not there, so default value is returned (120).

1.3.6.1.2.1.191.1.7.1.24

ospfv3IfTEDisabled

TruthValue

Read-create

Indicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The object is set to the value true (1) to disable traffic engineering on the interface. Traffic engineering is enabled by default on the interface when traffic engineering is enabled in the area where the interface is attached.

Currently, the maximum access is read-only.

Protocol support is not there, so default value is returned (FALSE).

1.3.6.1.2.1.191.1.7.1.25

ospfv3IfLinkLSASuppression

TruthValue

Read-create

Specifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the origination.

Currently, the maximum access is read-only.

Protocol support is not there, so default value is returned (FALSE).

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Before reading this MIB table, run the ospfv3 mib-binding process-id command to bind the OSPFv3 process to SNMP.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 120596

Downloads: 681

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next