No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwIfIpTable

hwIfIpTable

hwIfIpTable describes the IP address of an interface. You can create one primary IP address and multiple secondary IP addresses on the interface. You can create, delete, and view the IP address configuration in this table.

The index of this table is hwIpAdEntAddr.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.1

hwIpAdEntAddr

IpAddress

Read-only

This object indicates the IP address of the interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.2

hwIpAdEntIfIndex

Integer

Read-create

The value of this object identifies the index of the interface that is configured with an IP address.

The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.3

hwIpAdEntNetMask

IpAddress

Read-create

This object indicates the subnet mask of the IP address.

The value of the mask is in the type of an IP address with all the network bits set to 1 and all the host bits set to 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.4

hwIpAdEntBcastAddr

Integer

Read-only

This object indicates the broadcast IP address.

The packet with the broadcast IP address is transmitted to all local interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.5

hwIpAdEntReasmMaxSize

Integer (0..65535)

Read-only

The value of this object identifies the maximum number of packets received by this IP interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.6

hwIpAdEntAddressType

HwIpAddressType

Read-create

The value of this object identifies whether the IP address is a primary IP address.

One interface has only one primary IP address, but can have many sub IP addresses. So when you add a primary IP address to an interface that has already a primary IP address, the new primary address will replace old primary address, and the old primary address is deleted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.7

hwIfIpMethod

INTEGER

{

assignedIp(1), dhcpIp(2), bootpIp(3), other(4), linklayer(5), random(6)

}

Read-write

The value of this object identifies the mode of obtaining an IP address.

  • assignedIp(1) indicates that the address was manually configured to a specified address, for example, by user configuration.
  • dhcpIp(2) indicates an address that was assigned to this system by a DHCP server.
  • bootpIp(3) indicates an address that was assigned to this system by the bootp protocol.
  • other(4) indicates an address created by another method.
  • linklayer(5) indicates an address created by IPv6 stateless auto-configuration.
  • random(6) indicates an address chosen by the system at random, for example, an IPv4 address within 10.1.0.0/16, or an RFC 3041 privacy address.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.41.1.2.1.1.8

hwIpAdEntAddrStatus

RowStatus

Read-create

The value of this object identifies the status of the row.

Currently, the values are as follows:

  • active(1)

  • notInService(2)

  • notReady(3)

  • createAndGo(4)

  • createAndWait(5)

  • destroy(6)

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table can be created. You can create the primary IP address, and then the secondary IP address on the interface. The newly-created IP address and mask cannot be the same as the existing ones.

Modification Restriction

After the IP address is created, the attribute of the IP address cannot be modified, because all the attributes of the IP address, except the row status, are closely associated with the IP address.

Currently, entries in hwIpAdEntIfIndex, hwIpAdEntNetMask, hwIpAdEntAddressType, and hwIfIpMethod can be created, but cannot be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 112378

Downloads: 675

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next