No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwEntCallEmulateTable

hwEntCallEmulateTable

This table is used to configure and query the call emulation test.

A user can use the NMS or tester to initiate the call test on the host. The call test completes a call between a pair of ports to verify the service configurations on the calling and called ports.

The call emulation test automatically performs all call operations between the calling party emulation test port and called party emulation test port, and keeps the call connected for a period of time before stopping the test. The user can query the call emulation test status or view the call test result in trap packets reported by the test module to verify that the call emulation test is successful.

The call emulation test conflicts with the calling or called party emulation test. That is, when the call emulation test starts, the calling or called party emulation test cannot be performed. Currently, the system supports the call emulation test only between two ports on the same device. That is, only one channel of the call emulation test is supported.

This table does not have any indexes.

The table entry of this table is hwEntCallEmulateEntry.

OID

Object Name

Data Type

Description

Maximum Access Permission

Status

1.3.6.1.4.1.2011.5.25.314.7.1.1

hwEntCallEmulateIndex

Integer32

This object indicates the call emulation index, which is allocated by the host. The value is always set to 0 when the call emulation test is created.

The value is 0.

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.7.1.2

hwEntCallEmulateOprType

INTEGER

This object indicates the operation type of the call emulation test.

The options are as follows:

  • 1: stop
  • 2: start

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.7.1.3

hwEntCallEmulateCallerPort

Integer32

This object indicates the calling party port in the call emulation test.

bits 31-24: reserved

bits 23-16: slot index

bits 15-8: subcard index

bits 7-0: port index

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.7.1.4

hwEntCallEmulateCalledPort

Integer32

This object indicates the called party port in the call emulation test.

bits 31-24: reserved

bits 23-16: slot index

bits 15-8: subcard index

bits 7-0: port index

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.7.1.5

hwEntCallEmulateCalledTelno

OCTET STRING

This object indicates the called number in the call emulation test.

Length: a string of 1 to 32 digits

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.7.1.6

hwEntCallEmulateStatus

Integer32

This object indicates the call emulation test status.

Value range: 1 to 6

  • 1: No dial tone is detected.
  • 2: Dialing fails.
  • 3: The call number does not match.
  • 4: The called party does not pick up.
  • 5: The call is normal.
  • 6: The test fails.

Read-only

Current

1.3.6.1.4.1.2011.5.25.314.7.1.7

hwEntCallEmulateResult

INTEGER

This object indicates the call emulation test result.

The options are as follows:

  • 1: No dial tone is detected.
  • 2: Dialing fails.
  • 3: The call number does not match.
  • 4: The called party does not pick up.
  • 5: The call is normal.
  • 6: The test fails.

Read-only

Current

Creation Restriction

Currently, only one channel of the call emulation test is supported.

Modification Restriction

None.

Deletion Restriction

Users can stop the test and delete test configuration data.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 97224

Downloads: 648

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next