No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwEntPotsPathTestTable

hwEntPotsPathTestTable

This table is used to configure the path test.

The path test is classified into the hardware test and business test. The path test implements the test on hardware and data configurations related to POTS services. Test personnel can locate faults based on test results.

This table does not have any indexes.

OID

Object Name

Data Type

Description

Maximum Access Permission

Status

1.3.6.1.4.1.2011.5.25.314.3.1

hwEntPotsPathTestPort

Integer32

This object indicates the path test port.

bits 31-24: reserved

bits 23-16: slot index

bits 15-8: subcard index

bits 7-0: port index

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.3.2

hwEntPotsPathTestMode

INTEGER

This object indicates the path test type.

The options are as follows:

  • 1: hardware
  • 2: business

The hardware test only tests hardware on the device but not data.

The business test performs comprehensive test on the hardware and configuration data to verify that users can use services.

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.3.3

hwEntPotsPathTestAssistPort

Integer32

This object indicates the path test auxiliary port.

bits 31-24: reserved

bits 23-16: slot index

bits 15-8: subcard index

bits 7-0: port index

If no auxiliary port is specified, the tester sets the value to 0xffffffff and transfers it to the host.

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.3.4

hwEntPotsPathTestDestTelno

OCTET STRING

This object indicates the phone number of the target user port.

Length range: 0 to 32

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.3.5

hwEntPotsPathTestOprType

INTEGER

This object indicates the operation type.

The options are as follows:

  • 1: stop
  • 2: start

Read-write

Current

1.3.6.1.4.1.2011.5.25.314.3.6

hwEntPotsPathTestResult

Integer32

This object indicates the path test result.

Value range: 1 to 23

1: success

2: off-hook failure on the target user port

3: off-hook failure on the auxiliary user port

4: on-hook failure on the target user port

5: on-hook failure on the auxiliary user port

6: ringing failure on the target user port

7: ring trip failure on the target user port

8: Continuity test 1 fails. The target user port sends a DTMF signal to the TDM side, but the auxiliary user port does not detect the corresponding DTMF signal.

9: Continuity test 2 fails. The auxiliary user port sends a DTMF signal to the TDM side, but the target user port does not detect the corresponding DTMF signal.

10: Continuity test 3 fails. The target user port sends a DTMF signal to the IP side, but the target user port does not detect the corresponding DTMF signal at the TDM side.

11: Continuity test 4 fails. The auxiliary user port sends a DTMF signal to the IP side, but the auxiliary user port does not detect the corresponding DTMF signal at the TDM side.

12: dial tone waiting failure on the auxiliary user port

13: ringing waiting failure on the target user port

14: system exception

15: The target user port is busy, and the test stops.

16: The target user port is in off-hook state, and the test stops.

17: DSP resources are insufficient. The call channel test cannot be performed and stops.

18: The DSP network side function test fails. (The turn around function is enabled.)

19: The DSP network side function test fails.

20: The codec loopback test succeeds. The SLIC loopback test fails. The SLIC chip is faulty.

21: The TDM loopback test fails. The codec and SLIC loopback tests fail. The Codec chip, SLIP chip, or highway bus is faulty.

22: The DSP is faulty. The DSP TDM loopback test fails.

23: The codec loopback test fails. The codec chip is faulty.

Read-only

Current

Creation Restriction

None.

Modification Restriction

None.

Deletion Restriction

None.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 127189

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next