No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwMgmdRouterInterfaceTable

hwMgmdRouterInterfaceTable

This table lists parameters of IGMP or MLD enabled on an interface.

The indexes of this table are hwMgmdRouterInterfaceIfIndex and hwMgmdRouterInterfaceQuerierType.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.1

hwMgmdRouterInterfaceIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.2

hwMgmdRouterInterfaceQuerierType

InetAddressType

Not-accessible

This object indicates the address type of an interface.

  • 1: IPv4
  • 2: IPv6

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.3

hwMgmdRouterInterfaceQuerier

InetAddress (SIZE (4..4)) (SIZE (16..16))

Read-only

This object indicates the address of a querier.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.4

hwMgmdRouterInterfaceQueryInterval

Unsigned32

Read-create

This object indicates the query interval.

The value ranges from 1 to 31744, in seconds.

The IGMP query interval defaults to be 60 seconds and the MLD query interval defaults to be 125 seconds.

Currently, the value ranges from 1 to 18000.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.5

hwMgmdRouterInterfaceStatus

RowStatus

Read-create

This object indicates the row status.

Currently, CreateAndGo and Destroy are supported.

When you perform the Get operation on this object, active(1) is returned.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.6

hwMgmdRouterInterfaceVersion

Unsigned32

Read-create

The value of this object identifies the version of IGMP or MLD enabled on an interface.

  • 1: IGMPv1
  • 2: IGMPv2 or MLDv1
  • 3: IGMPv3 or MLDv2

By default, the version of IGMP is IGMPv2, the version of MLD is MLDv2.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.7

hwMgmdRouterInterfaceQueryMaxResponseTime

Unsigned32

Read-create

This object indicates the maximum response time on an interface.

The value is in 1/10 seconds.

The value ranges from 0 to 31744.

The default value is 100.

Currently, the value ranges from 10 to 250. If the IGMP version is IGMPv1, the return value is always 0.

NOTE:

As defined in the protocol, the MgmdRouterInterfaceQueryMaxResponseTime is represented in tenths of seconds. our devices, however, implement the MgmdRouterInterfaceQueryMaxResponseTime only in seconds. During value transition, an offset is generated because integer rounding is done.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.8

hwMgmdRouterInterfaceQuerierUpTime

TimeTicks

Read-only

This object indicates the time period during which a querier keeps Up.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.9

hwMgmdRouterInterfaceQuerierExpiryTime

TimeTicks

Read-only

This object indicates the time remaining before a querier expires.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.10

hwMgmdRouterInterfaceWrongVersionQueries

Counter32

Read-only

This object indicates the number of the query messages that are in different versions with the querier.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.11

hwMgmdRouterInterfaceJoins

Counter32

Read-only

This object indicates the number of multicast groups that user hosts joined through this interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.12

hwMgmdRouterInterfaceProxyIfIndex

InterfaceIndexOrZero

Read-create

Some devices implement a form of IGMP or MLD proxying whereby memberships learned on the interface represented by this row cause Host Membership Reports to be sent on the interface whose ifIndex value is given by this object. Such a device would implement the hwMgmdV2RouterBaseMIBGroup only on its router interfaces (those interfaces with non-zero hwMgmdRouterInterfaceProxyIfIndex). Typically, the value of this object is 0, indicating that no proxying is being done.

The default value is 0.

The maximum access is read-only;

The value of this object is always 0.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.13

hwMgmdRouterInterfaceGroups

Gauge32

Read-only

This object indicates the number of multicast groups on an interface.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.14

hwMgmdRouterInterfaceRobustness

Unsigned32

Read-create

This object indicates the robustness variable.

The value ranges from 1 to 255.

The default value is 2.

Currently, the value ranges from 2 to 5. If IGMPv1 is run on the interface, the value 1 is returned when the Get operation is performed on the node. This is meaningless.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.15

hwMgmdRouterInterfaceLastMembQueryIntvl

Unsigned32

Read-create

This object indicates the last member query interval.

The value is in 1/10 seconds.

The value ranges from 0 to 31744.

The default value is 10.

Currently, the value range of 10 to 50 is supported.

NOTE:

As defined in the protocol, the MgmdRouterInterfaceLastMemberQueryInterval is represented in tenths of seconds. our devices, however, implement the MgmdRouterInterfaceLastMemberQueryInterval only in seconds. During value transition, an offset is generated because integer rounding is done.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.16

hwMgmdRouterInterfaceLastMembQueryCount

Unsigned32

Read-only

This object indicates the last member query times.

The value ranges from 1 to 255.

The default value is 2.

Currently, the value ranges from 2 to 5. If IGMPv1 is run on the interface, the value 1 is returned when the Get operation is performed on the node. This is meaningless.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.17

hwMgmdRouterInterfaceStartupQueryCount

Unsigned32

Read-only

This object indicates the query start times.

The value ranges from 1 to 255.

The default value is 2.

Currently, the value ranges from 2 to 5. If IGMPv1 is run on the interface, the value 1 is returned when the Get operation is performed on the node. This is meaningless.

1.3.6.1.4.1.2011.5.25.149.3.1.4.1.18

hwMgmdRouterInterfaceStartupQueryInterval

Unsigned32

Read-only

This object indicates the query start interval.

The time is expressed in seconds.

The value ranges from 0 to 31744.

The default value is 31.

Currently, the value ranges from 0 to 4500.

Creation Restriction

None

Modification Restriction

The value range of hwMgmdRouterInterfaceQueryInterval defined in the MIB protocol is 1 to 31744 but the command line supports only 1 to 18000. Therefore, if the value set in the MIB is not within the range that the command line supports, an error code "WrongValue" is returned.

The value range of hwMgmdRouterInterfaceQueryMaxResponseTime defined in the MIB is 0 to 31744, in 1/10 seconds but the command line supports only 1 to 25, in seconds. Therefore, the value set in the MIB must be in the range of 10 to 250; otherwise, the set operation fails and an error code "WrongValue" is returned.

The value range of hwMgmdRouterInterfaceRobustness defined in the MIB is 1 to 255 but the command line supports only 2 to 5. Therefore, if the value range set in the MIB is not within the range that the command line supports, an error code "WrongValue" is returned.

The value range of hwMgmdRouterInterfaceLastMembQueryIntvl defined in the MIB is 0 to 31744, in 1/10 seconds whereas the command line supports only 1 to 5. Therefore, the value set in the MIB must be within the range of 10 to 50; otherwise, the set operation fails and an error code "WrongValue" is returned.

The value ranges of hwMgmdRouterInterfaceLastMembQueryCount, hwMgmdRouterInterfaceStartupQueryCount, and hwMgmdRouterInterfaceStartupQueryInterval defined in the MIB are all greater than or equal to the ranges that command line supports. When you perform Get operations to these objects, the ranges supported by the command line are returned.

Deletion Restriction

None

Access Restriction

The entries in this table can be read only when multicast is enabled and IGMP or MLD is enabled on an interface.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 126957

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next