No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This table is used to create or delete the dot1q termination configuration.

The index of this table is hwQinQSubIfDot1qTermIfIndex.hwQinQSubIfDot1qTermVidStart.


Object Name


Max Access


Implemented Specifications




This object indicates the index of the dot1q termination sub-interface.

This object is implemented as defined in the corresponding MIB files.




This object indicates the start VID of the CE VLANs permitted by the dot1q termination sub-interface. The value ranges from 1 to 4094.

Currently, the value range of 1 to 4094 is supported.


Integer (0..16)


The value of this object identifies the ID of the group that dot1q termination sub-interfaces need to join. The value ranges from 0 to 16.

The default value is 0, indicating that the Group ID is not create.

This object is read-only and no entry can be created.




This object indicates the row status.

  • 1: active
  • 2: notInService
  • 3: notReady
  • 4: createAndGo
  • 5: createAndWait
  • 6: destroy

This object is read-only and no entry can be created.

Creation Restriction

  • The control VLAN on the sub-interface must be specified, and the control VLAN mode must be dot1q.

  • The number of ranges of CE VLAN IDs for dot1q termination on a sub-interface cannot be greater than 16, and CE VLAN IDs cannot overlap.

For example, if the value of hwQinQSubIfDot1qTermVidStart is set to 500 and the value of hwQinQSubIfDot1qTermVidEnd is set to 600, the value of hwQinQSubIfDot1qTermVidStart cannot be set to 300 and the value of hwQinQSubIfDot1qTermVidEnd cannot be set to 600. This is because overlapping exists between 300 to 500.

  • A sub-interface can be enabled with one of the three functions, that is, dot1q, QinQ, and VLAN stacking.

For example, if hwQinQSubIfTermTable or hwQinQSubIfVlanStackingTable is created, hwQinQSubIfDot1qTermTable cannot be created.

  • The settings of hwQinQSubIfDot1qTermVidStart and hwQinQSubIfDot1qTermVidEnd cannot overlap the setting of hwQinQSubIfVlanStackingCE in hwQinQSubIfTermPEVlan or hwQinQSubIfVlanStackingTable.

  • In the case of unicast route enabled by the control VLAN, only definite sub-interface can be set, that is hwQinQSubIfDot1qCEVlanStart = hwQinQSubIfDot1qTermVidEnd.

  • When the value of hwQinQSubIfDot1qTermGroupId is specified, confirm that the value is already set on the sub-interface.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction


Access Restriction


Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 122760

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next