No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Functions Overview

Functions Overview

Pseudo-Wire Emulation Edge to Edge (PWE3) is an end-to-end technology used to bear Layer 2 services, and belongs to the Layer 2 virtual private network (L2VPN) in the point-to-point mode. PWE3 adopts the Label Distribution Protocol (LDP) as the signaling mode, emulates Layer 2 services such as Layer 2 data packets on the Customer Edge (CE) through tunnels such as Multi-protocol Label Switch Protocol Label Switched Paths (MPLS LSPs), or Generic Routing Encapsulation (GRE) tunnels, and transparently transmits the Layer 2 data of the CE in the PSN network. This emulation is proximate but not absolute. For example, this proximate emulation may cause distortion for the Time Division Multiplexing (TDM) data.

The related draft of PWE3 provides the public MIB. The draft is constantly updated and is not completely consistent with the PWE3 implementation of the device, so the private MIB is defined for the PWE3 module. The task of this module is to implement the functions defined by the private MIB on the managed devices. The PWE3 MIB contains the public MIB.

The OID of the root object is as follows:


Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 120487

Downloads: 681

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next