No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MIB Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mplsFTNTable

mplsFTNTable

This table contains the currently defined FTN entries. This table allows FEC to NHLFE mappings to be specified. Each entry in this table defines a rule to be applied to incoming packets and an action to be taken on matching packets.

The action pointer points either to instance of mplsXCEntry in MPLS-LSR-STD-MIB when the NHLFE is a non-TE LSP, or to an instance of mplsTunnelEntry in the MPLS-TE-STD-MIB when the NHLFE is an originating TE tunnel.

The index of this table is mplsFTNIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.10.166.8.1.3.1.1

mplsFTNIndex

MplsFTNEntryIndex

Not-accessible

This is the unique index for a conceptual row in mplsFTNTable.

To create a new conceptual row in mplsFTNTable a Network Management Application SHOULD retrieve the current value of mplsFTNIndexNext to determine the next valid available value of mplsFTNIndex.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.10.166.8.1.3.1.2

mplsFTNRowStatus

RowStatus

Read-create

Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time.

If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in mplsFTNMapTable pointing to the row (for example, when mplsFTNIndex of the conceptual row being deleted is equal to mplsFTNMapCurrIndex for one or more entries in mplsFTNMapTable), the agent MUST also sets the corresponding entries to destroy in mplsFTNMapTable.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.4

mplsFTNMask

BITS {sourceAddr(0),destAddr(1),sourcePort(2),destPort(3),protocol(4),dscp(5)}

Read-create

This bit map indicates which of the fields described next, namely source address range, destination address range, source port range, destination port range, IPv4 Protocol field or IPv6 next-header field and Differentiated Services Code Point (DSCP) is active for this FTN entry.

If a particular bit is set to zero then the corresponding field in the packet MUST be ignored for comparison purposes.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.5

mplsFTNAddrType

InetAddressType

Read-create

This object indicates the address type of FTN source and destination addresses.

The value can only be ipv4(1).

1.3.6.1.2.1.10.166.8.1.3.1.8

mplsFTNDestAddrMin

InetAddress

Read-create

The lower end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.9

mplsFTNDestAddrMax

InetAddress

Read-create

The higher end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.15

mplsFTNDscp

Dscp

read-create

This object indicates the content of the DSCP field.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.16

mplsFTNActionType

INTEGER {redirectLsp(1), -- redirect into LSP redirectTunnel(2) -- redirect into tunnel}

Read-create

The type of action to be taken on packets matching this FTN entry.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.17

mplsFTNActionPointer

RowPointer

Read-create

If mplsFTNActionType is redirectLsp(1), then this object MUST contain zeroDotZero or point to an instance of mplsXCEntry indicating the LSP to redirect matching packets to.

If mplsFTNActionType is redirectTunnel(2), then this object MUST contain zeroDotZero or point to an instance of mplsTunnelEntry indicating the MPLS TE tunnel to redirect matching packets to.

If this object points to a conceptual row instance in a table consistent with mplsFTNActionType but this instance does not currently exist then no action will be taken on packets matching such an FTN entry till this instance comes into existence.

If this object contains zeroDotZero then no action will be taken on packets matching such an FTN entry till it is populated with a valid pointer consistent with the value of mplsFTNActionType as explained above.

Currently, the maximum access is read-only.

1.3.6.1.2.1.10.166.8.1.3.1.18

mplsFTNStorageType

StorageType

Read-create

The storage type for this FTN entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

Currently, the maximum access is read-only.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

None.

Translation
Download
Updated: 2019-06-05

Document ID: EDOC1000097213

Views: 124909

Downloads: 688

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next