No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an OUI for a Voice VLAN

Configuring an OUI for a Voice VLAN


An Organizationally Unique Identifier (OUI) is the first 24 bits of a MAC address, and is a unique identifier assigned to a device vendor.

An OUI represents a MAC address segment that is obtained by performing the AND operation between a 48-bit MAC address and a mask. If the first 24 bits of the MAC address of a device are the same as an OUI, a voice VLAN-enabled port considers the device as a voice device and data from the device as voice data.


  1. Run:


    The system view is displayed.

  2. Run:

    voice-vlan mac-address  mac-address mask oui-mask [ description text ]

    An OUI is configured.

    When configuring an OUI for a voice VLAN, note the following:
    • The mac-address value cannot be all 0s or a multicast or broadcast address.

    • A device can be configured with a maximum of 16 OUIs. When the device is configured with 16 OUIs, subsequent configurations will not take effect.

    • When using the undo voice-vlan mac-address mac-address command to delete an OUI, specify the mac-address value in this command as the result of the AND operation by using the configured MAC address and mask.

Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 20207

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next