No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Secure or Normal Mode of a Voice VLAN

(Optional) Configuring the Secure or Normal Mode of a Voice VLAN

Context

Based on the data filtering mechanism, a voice VLAN works in either secure or normal mode.

Table 7-2 shows how to process frames in different voice VLAN working modes.

Procedure

  • Security mode

    1. Run the system-view command to enter the system view.
    2. Run the interface interface-type interface-number command to enter the view of interface.
    3. Run the voice-vlan security enable command to configure the voice VLAN work in security mode.

      By default, a voice VLAN works in security mode.

  • Normal mode

    1. Run the system-view command to enter the system view.
    2. Run the interface interface-type interface-number command to enter the view of interface.
    3. Run the undo voice-vlan security enable command to configure the voice VLAN work in normal mode.

      By default, a voice VLAN works in security mode.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 19858

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next