No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Maximum Transmission Rate of an Interface

Setting the Maximum Transmission Rate of an Interface

Context

The more BPDUs sent from an interface within a Hello Time interval, the more system resources consumed. Setting a proper transmission rate (packet-number) on an interface prevents excess bandwidth usage when network flapping occurs.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface interface-type interface-number

    The view of an Ethernet interface participating in STP calculation is displayed.

  3. Run:

    stp transmit-limit packet-number

    The maximum transmission rate of BPDUs (BPDUs per second) is set for the interface.

    By default, an interface sends a maximum of six BPDUs per second.

    NOTE:

    If the same maximum transmission rate of BPDUs needs to be sent for each interface on a device, run the stp transmit-limit (system view) command.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 16630

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next