No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Maximum Transmission Rate of an Interface

Setting the Maximum Transmission Rate of an Interface

Context

.A larger value of packet-number indicates more BPDUs sent in a hello interval and therefore more system resources occupied. Setting the proper value of packet-number prevents excess bandwidth usage when route flapping occurs.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface interface-type interface-number

    The view of the Ethernet interface participating in STP calculation is displayed.

  3. Run:

    stp transmit-limit packet-number

    The maximum number of BPDUs sent by a port in a specified period is set.

    By default, the maximum number of BPDUs that a port sends is 6 per second.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 17092

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next