No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using VLAN Assignment to Implement Layer 2 Isolation

Using VLAN Assignment to Implement Layer 2 Isolation

As shown in Figure 3-14, there are multiple companies in a building. These companies share network resources to reduce costs. Networks of the companies connect to different interfaces of Router2 and access the Internet through an egress.

Figure 3-14  Networking of interface-based VLAN assignment

To isolate services and ensure service security of different companies, add interfaces connected to the companies to different VLANs. Each company has a virtual router and each VLAN is a virtual work group.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 20720

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next