No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inter-VLAN Layer 3 Isolation

Inter-VLAN Layer 3 Isolation

After inter-VLAN Layer 3 connectivity is implemented between two VLANs, all users in the VLANs can communicate. In some scenarios, communication between some users needs to be prevented or only unidirectional communication is allowed. For example, user hosts and servers often use unidirectional communication, and visitors to an enterprise are often allowed to access only the Internet or some servers. In these scenarios, you need to configure inter-VLAN isolation.

Inter-VLAN isolation is often implemented using a traffic policy. You can define traffic classifiers on a device to match packets with certain characteristics and associate the traffic classifiers with the permit or deny behavior in a traffic policy. The device then permits or rejects the packets matching the traffic classifiers. This technology implements flexible inter-VLAN isolation.

The device supports inter-VLAN Layer 3 isolation based on MQC and simplified ACL-based traffic policies. For details about MQC and simplified ACL-based traffic policies, see MQC Configuration and ACL-based Simplified Traffic Policy Configuration in Huawei AR Series IOT Gateway Configuration Guide - QoS.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 9844

Downloads: 62

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next