No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AR500, AR510, and AR530 V200R007 CLI-based Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring transparent bridge, MAC table, link aggregation, VLANs, STP/RSTP/MSTP, and so on.The document provides the configuration procedures and configuration examples to illustrate the service configuration methods and application scenario.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Super-VLAN

Creating a Super-VLAN

Context

A super-VLAN consists of several sub-VLANs. No physical interface can be added to a super-VLAN, but a VLANIF interface can be configured for the super-VLAN and an IP address can be assigned to the VLANIF interface.

NOTE:

Before configuring a super-VLAN, ensure that sub-VLANs have been configured.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    vlan vlan-id

    A VLAN is created and the VLAN view is displayed.

    The VLAN ID of a super-VLAN must be different from each sub-VLAN ID.

  3. Run:

    aggregate-vlan

    A super-VLAN is created.

    A super-VLAN cannot contain any physical interfaces.

    VLAN 1 cannot be configured as a super-VLAN.

  4. Run:

    access-vlan { vlan-id1 [ to vlan-id2 ] } &<1-10>

    A sub-VLAN is added to a super-VLAN.

    Before adding sub-VLANs to a super-VLAN, ensure that these sub-VLANs are not configured with VLANIF interfaces.

Translation
Download
Updated: 2019-05-25

Document ID: EDOC1000097279

Views: 17165

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next